|
Re: [GMCnet] HiPerf 455 in Riverside CA [message #209806 is a reply to message #209802] |
Tue, 04 June 2013 08:49 |
powerjon
Messages: 2446 Registered: January 2004
Karma: 5
|
Senior Member |
|
|
Your right, great motor for a 442, but not for the motorhome. Built for a different application.
JR Wright
78 Buskirk Stretch
Michigan
On Jun 4, 2013, at 9:38 AM, Edward Jarmul <falcon160244@gmail.com> wrote:
> This would be great for the speed demons if it fit but even the valve
> covers may be a problem not considering the high rise intake manifold/carb
> would need a box over the engine cover. Also, the cam may be too
> radical/not the right torque curve for the GMC MH. Not too far from
> Jim/Manny though who probably have their own interests.
> http://www.hemmings.com/parts/item/4093.html?refer=blog
>
> EdJ
> 73 Glacier, 26' 455
> 77 Coca Cola 26' 403
> 69 Vette Coupe 350/350
> Soon to be Gloucester, NC
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
J.R. Wright
GMC GreatLaker
GMC Eastern States
GMCMI
78 30' Buskirk Stretch
75 Avion Under Reconstruction
Michigan
|
|
|
Re: [GMCnet] HiPerf 455 in Riverside CA [message #209859 is a reply to message #209806] |
Tue, 04 June 2013 18:37 |
Jim Bounds
Messages: 842 Registered: January 2004
Karma: 0
|
Senior Member |
|
|
Probably be a great motor for a car & $8K is a good deal, Mondello's biggie is $12K. When you talk about those motors you forget $. It's that way really about any performance purpose built motor.If you find one cheap, be very afraid. Forget the down and dirty $4k motors, just ain't hapnen. Out machine work and parts is more than that. Truly with a motor, you get what you pay for, no way around it. Our roller cam motors are $6K and you cannot do better. Joe told me I have Campaign ideas on a beer budget! I resemble that remark and appreciate the recognition!
Jim Bounds
--------------------
________________________________
From: John Wright <powerjon@chartermi.net>
To: gmclist@temp.gmcnet.org
Sent: Tuesday, June 4, 2013 9:49 AM
Subject: Re: [GMCnet] HiPerf 455 in Riverside CA
Your right, great motor for a 442, but not for the motorhome. Built for a different application.
JR Wright
78 Buskirk Stretch
Michigan
On Jun 4, 2013, at 9:38 AM, Edward Jarmul <falcon160244@gmail.com> wrote:
> This would be great for the speed demons if it fit but even the valve
> covers may be a problem not considering the high rise intake manifold/carb
> would need a box over the engine cover. Also, the cam may be too
> radical/not the right torque curve for the GMC MH. Not too far from
> Jim/Manny though who probably have their own interests.
> http://www.hemmings.com/parts/item/4093.html?refer=blog
>
> EdJ
> 73 Glacier, 26' 455
> 77 Coca Cola 26' 403
> 69 Vette Coupe 350/350
> Soon to be Gloucester, NC
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|