GMCforum: GMCnet » Lowering my Honda seats 2"

Home » Public Forums » GMCnet » Lowering my Honda seats 2"

Show: Today's Messages :: Polls :: Message Navigator

Lowering my Honda seats 2" [message #209740]

Mon, 03 June 2013 15:46

C Boyd

Messages: 2629
Registered: April 2006

Karma:

Senior Member

When I installed my Honda seats I went by the easy method of using 2 pcs of channel from box store and drilling one hole install. Recommendation was to mount the u channel to seat and mount seat to top of offset swivel pedistals with 4 bolts. I did cheat at this point and bolt the u channel under the base to get it a little lower. So 2 years later she is still using a foot stool to reach the floor. I get to finally thinkin and realize I can use longer bolts and spacers 1 1/2" or 2" long and lower the seat. DUH....
http://www.gmcmhphotos.com/photos/g6390-honda-seat-lowering.html
I will post final pic result when I get to it. I need to dig out 8 bolts and 8 spacers.

C. Boyd
76 Crestmont
East Tennessee

Report message to a moderator

[Message index]

Lowering my Honda seats 2"

By: C Boyd on Mon, 03 June 2013 15:46

Previous Topic:	High output LED Driver
Next Topic:	[GMCnet] Raising the Barn Queen...

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Oct 06 22:25:37 CDT 2024

Total time taken to generate the page: 0.00535 seconds