[GMCnet] Front suspension [message #208844] |
Sun, 26 May 2013 12:12 |
|
ljdavick
Messages: 3548 Registered: March 2007 Location: Fremont, CA
Karma:
|
Senior Member |
|
|
I need to start budgeting for some front end work. I've always thought this coach wanders too much, even with the back end set properly. The write-ups from Karen, Jerry, and others step me through most procedures, but I have some questions.
Do the new 1-ton front ends use urethane bushings, or are urethane bushings beneficial?
Jim K has a new upper A-Frame from the Curtis's that can add mucho caster. Good idea?
Steering components - Dave Lenzi's parts look to be thoroughly reengineered and I suspect the workmanship is Rolex-like. Also I suspect (for no rational reason) that most of my slop comes from my old steering components.
Opinions are eagerly anticipated and appreciated.
Larry Davick
A Mystery Machine
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Larry Davick
A Mystery Machine
1976(ish) Palm Beach
Fremont, Ca
Howell EFI + EBL + Electronic Dizzy
|
|
|