Duracool, what should pressures be? [message #207168] |
Wed, 08 May 2013 14:20 |
Oldngray
Messages: 544 Registered: August 2009 Location: Punta Gorda Florida
Karma: 0
|
Senior Member |
|
|
I have heard 20,25 and 30#, my unit cools for about 5 minutes and then blows warm, suspect low pressure.
What pressure should it be?
Richard MacDonald
Punta Gorda, Florida
Sold our TZE April 2015
|
|
|
|
Re: Duracool, what should pressures be? [message #207174 is a reply to message #207168] |
Wed, 08 May 2013 15:11 |
An87ttype
Messages: 157 Registered: September 2012
Karma: 0
|
Senior Member |
|
|
I just charged mine last night. I evacuated, and put in 3 cans. The glass cleared at about 2.5 cans and it ended up at 25# at 1500rpm. Works great!
If its warming up, and the compressor is still running, I suspect too much Duracool. If its kicking off it may be low.
I usually just like to start over. A quick evacuate, and 3 cans Duracool.
1975 Eleganza II
Hudson Valley NY
|
|
|
|
|
|
|