Upper control arm bolts [message #207110] |
Tue, 07 May 2013 22:30 |
Hal StClair
Messages: 971 Registered: March 2013 Location: Rio Rancho NM
Karma:
|
Senior Member |
|
|
Anyone know of a real reason to install the offset bolts on the upper control arms in the same direction they were installed from the factory? The front bolt was installed from the rear with the nut toward the bumper Its a real pain to install the front ones from the rear rather than just installing them from the front with the nut toward the shock mount. Any thoughts? Thanks,Hal
"I enjoy talking to you. Your mind appeals to me. It resembles my own mind, except you happen to be insane."
1977 Royale 101348,
1977 Royale 101586, Diesel powered,
1974 Eagle Bus 45',w/slideout,
Rio Rancho, NM
|
|
|