GMCforum: GMCnet » Need bottom of 1973-1974 Davo Bed/Couch Cushion or Measurements

Home » Public Forums » GMCnet » Need bottom of 1973-1974 Davo Bed/Couch Cushion or Measurements

Show: Today's Messages :: Polls :: Message Navigator

Need bottom of 1973-1974 Davo Bed/Couch Cushion or Measurements [message #207081]

Tue, 07 May 2013 15:09

Devin

Messages: 203
Registered: July 2012
Location: Nashville Tennessee

Karma: 0

Senior Member

Still searching for the elusive bottom to the davo bunk that I have. Apparently I need the bottom couch cushions for coaches with a wood dinette. Later model flexsteel will not work. If you just have the measurements that would be great. It looks to be close to 72" long x 24" wide x 4" thick. Should be easy to ship this 1 cushion. You could probably roll it up and put it in a vaccum compression bag. Thanks!

Devin Wells Nashville, Tennessee 1974 GMC Sequoia 260 "Gilligan"

Report message to a moderator

Re: Need bottom of 1973-1974 Davo Bed/Couch Cushion or Measurements [message #207082 is a reply to message #207081]

Tue, 07 May 2013 15:20

lqqkatjon

Messages: 2324
Registered: October 2010
Location: St. Cloud, MN

Karma: 5

Senior Member

make your own?

http://www.rochfordsupply.com/shop/Foam/Foam_Sheets/Foam_Medium_Firm_HR_3319_-_Best_Seller/index.html

http://www.rochfordsupply.com/shop/Textiles/Upholstery/Upholstery_Fabric/index.html

You could probably just get by with wrapping the foam with the fabric, and duct tape the bottom.

Jon Roche 75 palm beach EBL EFI, manny headers, Micro Level, rebuilt most of coach now. St. Cloud, MN http://lqqkatjon.blogspot.com/

Report message to a moderator

Re: Need bottom of 1973-1974 Davo Bed/Couch Cushion or Measurements [message #207084 is a reply to message #207081]

Tue, 07 May 2013 15:27

Devin

Messages: 203
Registered: July 2012
Location: Nashville Tennessee

Karma: 0

Senior Member

Yes. That is probably what I will end up doing when I know the correct measurements.

Devin Wells Nashville, Tennessee 1974 GMC Sequoia 260 "Gilligan"

Report message to a moderator

Re: Need bottom of 1973-1974 Davo Bed/Couch Cushion or Measurements [message #207085 is a reply to message #207081]

Tue, 07 May 2013 15:50

A Hamilto

Messages: 4508
Registered: April 2011

Karma: 39

Senior Member

Did the deal between Dan Borlase and Kerry Pinkerton on the Swap Meet fizzle? Kerry was talking about removing his Davo bunk in the near future.

Report message to a moderator

Re: Need bottom of 1973-1974 Davo Bed/Couch Cushion or Measurements [message #207095 is a reply to message #207081]

Tue, 07 May 2013 19:15

SeanKidd

Messages: 747
Registered: June 2012
Location: Northern Neck Virginia

Karma: 4

Senior Member

69"X27"X4"
we had cushions made for entire coach using ultra suede. I also made custom hinges to allow the base to open fully. The original only allows a few inches of access because the base hits the step.

http://www.gmcmhphotos.com/photos/canyon-lands-interior/p49114-image44.html

Sean and Stephanie
73 Ex-CanyonLands 26' #317 "Oliver"
Hubler 1-Ton, Quad-Bags, Rear Disc, Reaction Arms, P.Huber TBs, 3.70:1 LSD Honda 6500 inverter gen.
Colonial Travelers

Report message to a moderator

Re: Need bottom of 1973-1974 Davo Bed/Couch Cushion or Measurements [message #207099 is a reply to message #207095]

Tue, 07 May 2013 20:37

Dennis S

Messages: 3046
Registered: November 2005

Karma: 2

Senior Member

Sean,

You have made some very impressive progress on your coach over the last year+.
Thank you for sharing the photos.

Dennis

SeanKidd wrote on Tue, 07 May 2013 19:15

Dennis S
73 Painted Desert 230
Memphis TN Metro

Report message to a moderator

Re: Need bottom of 1973-1974 Davo Bed/Couch Cushion or Measurements [message #207120 is a reply to message #207081]

Wed, 08 May 2013 06:43

Devin

Messages: 203
Registered: July 2012
Location: Nashville Tennessee

Karma: 0

Senior Member

I agree Sean. Wow! Wish I had caught those cushions when you were giving them away.

Devin Wells Nashville, Tennessee 1974 GMC Sequoia 260 "Gilligan"

Report message to a moderator

Re: Need bottom of 1973-1974 Davo Bed/Couch Cushion or Measurements [message #207128 is a reply to message #207081]

Wed, 08 May 2013 08:45

SeanKidd

Messages: 747
Registered: June 2012
Location: Northern Neck Virginia

Karma: 4

Senior Member

Thank you, I have a great support system (CFO) and I love to tinker.

But could not do a lot of it without the dedication of GMCNETers

Sean and Stephanie
73 Ex-CanyonLands 26' #317 "Oliver"
Hubler 1-Ton, Quad-Bags, Rear Disc, Reaction Arms, P.Huber TBs, 3.70:1 LSD Honda 6500 inverter gen.
Colonial Travelers

Report message to a moderator

Re: Need bottom of 1973-1974 Davo Bed/Couch Cushion or Measurements [message #207144 is a reply to message #207081]

Wed, 08 May 2013 10:44

DrPepper

Messages: 80
Registered: February 2013
Location: Goose Creek,SC

Karma: 0

Member

I worked out a deal on 6" Latex Mattress Cores..
Soft Core 38" X 79.5" X 6" is $155
Medium Core 38" X 79.5" X 6" is $160
Firm Core 38" X 79.5" X 6" is $174

I was going to put it on our website but it did not seem that anyone was interested

Phillip Udel - I Own a 1975 Avion

Report message to a moderator

Previous Topic:	[GMCnet] Help with VIN confusion.
Next Topic:	78 Royale house wiring

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Oct 06 20:25:01 CDT 2024

Total time taken to generate the page: 0.02135 seconds