Home » Public Forums » GMCnet » Work Rally in Hamilton OH June 1-2
| Work Rally in Hamilton OH June 1-2 [message #205998] |
Fri, 26 April 2013 12:28  |
 |
Matt Colie
Messages: 8547
Registered: March 2007
Location: S.E. Michigan
Karma: 7
|
Senior Member |
|
|
Finally, We got all the ducks lined up nicely...
The Miller Family of Hamilton (about halfway between Dayton and Cincinnati) and Eastern States are hosting a work rally. This is a no badge, no fee rally (we hope you will contribute to cover the food cost).
Start at:
http://www.gmceast.com/rallies/
Register at:
http://www.gmceast.com/rallies/rallies/rally-reg-1306.php
You do not have to be an Eastern States member.
You don't actually have to be a member of anything, but if you are going to work on it, it has to be a TZE coach.
I'm planning to be there. I'm actually hoping that I can't find anything I want to do on my coach those days.
If you want/need full hookup, that's not happening.
Matt - 225 miles north
Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit
|
|
|
|
|
|
|
|
|
|
| Re: Work Rally in Hamilton OH June 1-2 [message #206070 is a reply to message #206048] |
Fri, 26 April 2013 22:01  |
Ken Burton
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
| C Boyd wrote on Fri, 26 April 2013 19:29 |
Matt: done. See you there. I plan on installing 1 or 2 updated steering columns and will bring repair parts if anyone needs help with their columns.
|
Do not forget to bring my 30 mpg carburetor.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
|
|
|
| Re: [GMCnet] GMCWS -coos bay rally [message #206098 is a reply to message #206086] |
Sat, 27 April 2013 08:48 |
 |
WD0AFQ
Messages: 7111
Registered: November 2004
Location: Dexter, Mo.
Karma: 207
|
Senior Member |
|
|
| Mr ERFisher wrote on Sat, 27 April 2013 06:42 |
Ken h
Are you going to be here for this rally?
Want folks to order wipers early
And
You can talk about
Speed
Controls
Motors
Free delivery 
Gene
FREE WIFI @ Mickey D
On Apr 26, 2013, at 6:35 PM, Ken Henderson <hend4800@bellsouth.net> wrote:
> Darn, a month late. Grandson Dennis & I will be in CA by then. 
>
> Ken H.
>
>
> On Fri, Apr 26, 2013 at 1:28 PM, Matt Colie wrote:
>
>>
>>
>> Finally, We got all the ducks lined up nicely...
>>
>> The Miller Family of Hamilton (about halfway between Dayton and
>> Cincinnati) and Eastern States are hosting a work rally.
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
This aint no talking rally. Strictly work. One of the most fun ones I have been to.
Dan
3 In Stainless Exhaust Headers
One Ton All Discs/Reaction Arm
355 FD/Quad Bag/Alum Radiator Manny Tran/New eng.
Holley EFI/10 Tire Air Monitoring System
Solarized Coach/Upgraded Windows
Satelite TV/On Demand Hot Water/3Way Refer
|
|
|
|
| Re: [GMCnet] GMCWS -coos bay rally [message #206117 is a reply to message #206086] |
Sat, 27 April 2013 11:10 |
Ken Henderson
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
I'm not sure what rally you're talking about, Gene. If Hamilton, no; I
have to have Dennis at SFO on 4 June for his flight back to ATL. If any
other while I'm in its vicinity, certainly.
BUT, there won't be any full wiper kits. Too much stuff to haul already,
plus the fact that my harness inventory is depleted and I haven't had time
to build any. I MIGHT be able to bring along a couple of hardware-only
kits. :-( Anything else, I'm up for.
Ken H.
On Sat, Apr 27, 2013 at 7:42 AM, wrote:
> Ken h
> Are you going to be here for this rally?
>
> Want folks to order wipers early
> And
> You can talk about
> Speed
> Controls
> Motors
> Free delivery :)
> Gene
>
> FREE WIFI @ Mickey D
>
>
>
>
>
> On Apr 26, 2013, at 6:35 PM, Ken Henderson wrote:
>
> > Darn, a month late. Grandson Dennis & I will be in CA by then. :-(
> >
> > Ken H.
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
| Re: [GMCnet] GMCWS -coos bay rally [message #206120 is a reply to message #206117] |
Sat, 27 April 2013 11:32 |
Mr ERFisher
Messages: 7117
Registered: August 2005
Karma: 2
|
Senior Member |
|
|
Here
http://gmc49ers.blogspot.com/?m=1
Gene
FREE WIFI @ Mickey D
On Apr 27, 2013, at 9:10 AM, Ken Henderson <hend4800@bellsouth.net> wrote:
> I'm not sure what rally you're talking about, Gene. If Hamilton, no; I
> have to have Dennis at SFO on 4 June for his flight back to ATL. If any
> other while I'm in its vicinity, certainly.
>
> BUT, there won't be any full wiper kits. Too much stuff to haul already,
> plus the fact that my harness inventory is depleted and I haven't had time
> to build any. I MIGHT be able to bring along a couple of hardware-only
> kits. :-( Anything else, I'm up for.
>
> Ken H.
>
> On Sat, Apr 27, 2013 at 7:42 AM, wrote:
>
>> Ken h
>> Are you going to be here for this rally?
>>
>> Want folks to order wipers early
>> And
>> You can talk about
>> Speed
>> Controls
>> Motors
>> Free delivery :)
>> Gene
>>
>> FREE WIFI @ Mickey D
>>
>>
>>
>>
>>
>> On Apr 26, 2013, at 6:35 PM, Ken Henderson wrote:
>>
>>> Darn, a month late. Grandson Dennis & I will be in CA by then. :-(
>>>
>>> Ken H.
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
|
|
| Re: [GMCnet] GMCWS -coos bay rally [message #206147 is a reply to message #206130] |
Sat, 27 April 2013 17:03 |
Ken Henderson
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Nope, we'll be long gone from you part of the country by then. We'll be in
Branson, MO by 20 September for the GMCMI Fall Convention, then on home.
Don't y'all get together during the summer?
Ken H.
On Sat, Apr 27, 2013 at 1:43 PM, KB wrote:
> > I'm not sure what rally you're talking about, Gene.
>
> Ok, I'm not Gene, but it's the western states/49ers rally in
> Coos Bay, October 2-7:
> http://gmcws.org/blog/?p=965
>
> Looks like a fun one. We're hoping to make it.
> I'm also hoping we'll get to have a Treasure Island
> rally right after it, but that may be just a hope.
>
> Karen
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
|
|
| Re: Work Rally in Hamilton OH June 1-2 [message #206153 is a reply to message #205998] |
Sat, 27 April 2013 17:31 |
|
|
I am planning to be there to have my Boyd updated steering column installed and to finally install the Henderson electric wiper system that I bought about 5 years ago.
I've only been there once before but my son Jim & I had a great time. It's not all work - there is plenty of time to drink the beer that you brought.
Bill Brown
Bill Brown - '77 Buckeye Cruiser
Coshocton OH
carguybill@sbcglobal.net
|
|
|
|
|
|
| Re: [GMCnet] Work Rally in Hamilton OH June 1-2 [message #206157 is a reply to message #206149] |
Sat, 27 April 2013 17:38 |
Ken Henderson
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Oh, I might have ventured up there during JUNE. The memories of my 4 years
in Purgatory (Dayton) have faded slightly.
Speaking of which, an old man's reminiscences: I received my MSEE in Jun
74, under the auspices ($$$) of Air Force Communications Command. Having
never had any interest in ham radio nor any other facet of communications,
I pulled strings to get a higher priority assignment -- USAF Foreign
Technology Division (FTD) at WPAFB, Dayton.
When I reported to my old commander from Hawaii (Chief of Staff at FTD) ,
he said "You don't want to work in this place...go find yourself a job
where you'll get credit for what you do." I wound up with the System
Program Director for Remotely Piloted Vehicles, at the time a high profile
project which I'd been reading about. Without even reviewing my records,
he pointed at my pilot's wings and said, "I need those...". (Then current
impression was that all pilots opposed RPV's (now called UAV's)). I should
have known then that I was entering Purgatory. :-(
Ken H.
On Sat, Apr 27, 2013 at 6:19 PM, Matt Colie wrote:
>
>
> Ken Henderson wrote on Sat, 27 April 2013 18:03
> > Nope, we'll be long gone from you part of the country by then. We'll be
> in Branson, MO by 20 September for the GMCMI Fall Convention, then on home.
> >
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
| Re: [GMCnet] GMCWS -coos bay rally [message #206254 is a reply to message #206147] |
Sun, 28 April 2013 17:11 |
Steven Ferguson
Messages: 3447
Registered: May 2006
Karma: 0
|
Senior Member |
|
|
I'm not gonna make a comment about the obvious on this.
Steve
On Sat, Apr 27, 2013 at 3:03 PM, Ken Henderson <hend4800@bellsouth.net>wrote:
> Nope, we'll be long gone from you part of the country by then. We'll be in
> Branson, MO by 20 September for the GMCMI Fall Convention, then on home.
>
> Don't y'all get together during the summer?
>
> Ken H.
>
> On Sat, Apr 27, 2013 at 1:43 PM, KB wrote:
>
> > > I'm not sure what rally you're talking about, Gene.
> >
> > Ok, I'm not Gene, but it's the western states/49ers rally in
> > Coos Bay, October 2-7:
> > http://gmcws.org/blog/?p=965
> >
> > Looks like a fun one. We're hoping to make it.
> > I'm also hoping we'll get to have a Treasure Island
> > rally right after it, but that may be just a hope.
> >
> > Karen
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Take care,
Steve
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
|
|
|
|
| Re: Work Rally in Hamilton OH June 1-2 [message #208608 is a reply to message #208540] |
Thu, 23 May 2013 01:49 |
Ken Burton
Messages: 10030
Registered: January 2004
Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
I plan to be there with no work to do on my own coach.
If anyone needs anything (trailer hitches, wind wings, radiator guards, etc.) from Blaine Merrell, I could stop by on the way and pick them up to save the shipping.
I know Blaine just finished a new batch of hitches. He keeps telling me he is not going to make any more and then goes and makes another batch any way.
I'm not selling anything so you need to talk to Blaine on prices and payment. I'll transport them if there are enough orders for me to go the 40 or 50 miles out of the way to go by there.
Installing a new hitch would be a great project on the pit at the work rally.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
|
| Re: [GMCnet] Work Rally in Hamilton OH June 1-2 [message #208632 is a reply to message #208608] |
Thu, 23 May 2013 10:28 |
Robert Burkitt
Messages: 41
Registered: February 2004
Location: Cincinnati, OH
Karma: 0
|
Member |
|
|
Ken -
That is great news, because it means that you are feeling okay. Are you
arriving on Friday in time for dinner? You said earlier that you were
bringing your truck scales and I have told several owners about that.
Installing a hitch would be a good project, I will see if anyone wants one.
I hope it is easier than the one I put on Bill Brinkdopke's coach, I had to
cut off the old hitch that was welded onto the frame.
Bring your meter collection, I would like to check out my coach for
wiring/grounds/etc.
Bob
-----Original Message-----
From: Ken Burton
Sent: Thursday, May 23, 2013 2:49 AM
To: gmclist@temp.gmcnet.org
Subject: Re: [GMCnet] Work Rally in Hamilton OH June 1-2
I plan to be there with no work to do on my own coach.
If anyone needs anything (trailer hitches, wind wings, radiator guards,
etc.) from Blaine Merrell, I could stop by on the way and pick them up to
save the shipping.
I know Blaine just finished a new batch of hitches. He keeps telling me he
is not going to make any more and then goes and makes another batch any way.
I'm not selling anything so you need to talk to Blaine on prices and
payment. I'll transport them if there are enough orders for me to go the 40
or 50 miles out of the way to go by there.
Installing a new hitch would be a great project on the pit at the work
rally.
--
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
Goto Forum:
Current Time: Sun Oct 06 18:28:48 CDT 2024
Total time taken to generate the page: 0.01115 seconds
|
GMCforum
Search
Help
Register
Login
Home
