GMCforum: GMCnet » Trans filter

Home » Public Forums » GMCnet » Trans filter (sealing)

Show: Today's Messages :: Polls :: Message Navigator

Trans filter [message #205300]

Fri, 19 April 2013 21:52

Hal StClair

Messages: 971
Registered: March 2013
Location: Rio Rancho NM

Karma:

Senior Member

I replaced the trans filter today and am a little worried about how loose it seemed to fit the case. I used a Wix 58882 filter and replaced the o-ring but it still felt loose. I have a Ragusa pan on it and don't know if it is supposed to support the filter or not.
Also, I added 5 qts of fluid which seems to be at least a quart less than I removed.I know the book says 4 qts and the pan is supposed to add an extra qt of capacity but it seems the PO had more fluid in it. I don't know if I can trust the dipstick readings.
Any help will be appreciated.
Thanks,Hal

"I enjoy talking to you. Your mind appeals to me. It resembles my own mind, except you happen to be insane." 1977 Royale 101348, 1977 Royale 101586, Diesel powered, 1974 Eagle Bus 45',w/slideout, Rio Rancho, NM

Report message to a moderator

[Message index]

		Trans filter By: Hal StClair on Fri, 19 April 2013 21:52
		Re: Trans filter By: Dennis S on Fri, 19 April 2013 22:03
		Re: [GMCnet] Trans filter By: jimk on Sat, 20 April 2013 01:09
		Re: [GMCnet] Trans filter By: sgltrac on Sat, 20 April 2013 08:43
		Re: [GMCnet] Trans filter By: jimk on Sat, 20 April 2013 12:49
		Re: Trans filter By: Hal StClair on Sat, 20 April 2013 22:01
		Re: Trans filter By: John Heslinga on Sat, 20 April 2013 23:05
		Re: [GMCnet] Trans filter By: jimk on Sat, 20 April 2013 23:38
		Re: Trans filter By: JohnL455 on Sun, 21 April 2013 09:27
		Re: Trans filter By: Hal StClair on Sun, 21 April 2013 22:49

Previous Topic:	[GMCnet] looking for transmission shift cable
Next Topic:	1977 Gmc MOTORHOME

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Sep 22 10:26:17 CDT 2024

Total time taken to generate the page: 0.03495 seconds