GMCforum: GMCnet » [GMCnet] Wheel Well Sealing...

Home » Public Forums » GMCnet » [GMCnet] Wheel Well Sealing...

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Wheel Well Sealing... [message #204956]

Wed, 17 April 2013 12:41

kelvin

Messages: 608
Registered: February 2004
Location: Eugene, OR

Karma:

Senior Member

In preparation for new brakes I decided to get all the suspension parts
powder coated and to clean up the wheels wells.

Most of the sealant between the plastic wheel well ('73) and the frame
was just globbed in there and a lot of it was popping loose. I took it
all out.

http://www.gmcmhphotos.com/photos/data/3240/Sealing_Wells.jpg

First question - what are the wheel wells made of? I know it's
poly-something but don't remember the "something".

Second question - what would you use to reseal those areas. That's bare
plywood edges we're seeing now and it's still in pretty good shape.
HUGE gaps to fill in the area on the left side of the picture.

I'm leaning towards polyurethane caulking unless someone has a better
idea...

Thanks in advance,
Kelvin
'73 23' in Eugene, OR
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

[Message index]

		[GMCnet] Wheel Well Sealing... By: kelvin on Wed, 17 April 2013 12:41
		Re: [GMCnet] Wheel Well Sealing... By: emerystora on Wed, 17 April 2013 13:33
		Re: [GMCnet] Wheel Well Sealing... By: kelvin on Wed, 17 April 2013 15:37
		Re: [GMCnet] Wheel Well Sealing... By: Mr ERFisher on Wed, 17 April 2013 16:11

Previous Topic:	[GMCnet] Fried laptop
Next Topic:	[GMCnet] It's Alive

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Sep 23 02:22:22 CDT 2024

Total time taken to generate the page: 0.02603 seconds