GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] What's Under The Step Behind The Driver's Seat?
[GMCnet] What's Under The Step Behind The Driver's Seat? [message #204254] Wed, 10 April 2013 09:08 Go to previous message
glwgmc is currently offline  glwgmc   United States
Messages: 1014
Registered: June 2004
Karma:
Senior Member
Remove the fender liner and you can see/work in that area easily.

Jerry
Jerry Work
The Dovetail Joint
Fine furniture designed and hand crafted in the 1907 former Masonic Temple building in historic Kerby, OR
glwork@mac.com
http://jerrywork.com
541-592-5360

================

A Hamilto wrote on Tue, 09 April 2013 20:18
> I need to cut out a notch and insert a "structural" pocket in the step behind the driver's seat to accomodate my new jack-knife sofa leg/support/track. It needs to be about 6" deep and 3" wide and a couple feet long.
> My head is too fat to stick very far into the engine hatch to see what might be there, and, although my arms are pretty long, I can't feel all the way over to where I need to cut to verify that there is nothing in the way. I don't have the front end high enough to get my fat self under it to look up from the bottom.
> Has anybody ever attempted to use that space before? What did you find under there?
> If no answers, I will get out the jack and block it up high enough to get my fat self under it to take a look.
> Thanks in advance.

==================



_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



Jerry & Sharon Work
78 Royale
Kerby, OR
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Can anyone look at a coach near Dyersburg, TN?
Next Topic: [GMCnet] bogey travel
Goto Forum:
  


Current Time: Sun Nov 17 12:36:16 CST 2024

Total time taken to generate the page: 0.00537 seconds