Home » Public Forums » GMCnet » [GMCnet] Alignment kits available again
| [GMCnet] Alignment kits available again [message #203222] |
Sun, 31 March 2013 19:41  |
glwgmc
Messages: 1014
Registered: June 2004
Karma: 10
|
Senior Member |
|
|
Hi All,
Only two of the GMC motorhome alignment kits are left so if you want one, be sure to let me know ASAP. The redesign is quite spiffy and makes the kits much easier to store and ship around. In addition to several of the clubs and a bunch of individuals now using the alignment kit, a number of our well known GMC specialists also have one. So far the feedback has all been quite positive and the simplifications incorporated into this version 2 should make it just that much better/easier to use. I am having the turn plates drop shipped to save the duplicate shipping costs and the rest of the kit now fits into a 5 x 5 x 30 inch box. "Assembly" is just screwing in four stainless steel machine screws. Everything is now self calibrating so you are good to go right out of the box.
Best of all, I was able to lower the price from $400 to $350 if I supply the laser/angle finder or $300 if you buy that yourself locally. Flat rate shipping is $50 for addresses east of the Mississippi River, $40 for addresses west of the River and $30 for addresses in Washington, Oregon and California. Shipping to Canada or elsewhere in the world will be the actual shipping charge. Paypal to glwork@mac.com or send a check to Jerry Work, PO Box 3195, Kerby, Oregon 97531. Be sure to include your shipping address.
Your coach drove straight and true when new, and it can again without road wander or rut follow if you get the tire air pressure, ride height and alignment properly set. With this kit you can quickly check ride height front and rear, steering box centering, frame parallelism on all six wheels, camber on all six wheels along with caster and toe on the two front wheels. You can do all these checks anywhere there is a roughly level parking area yourself in less than 30 minutes. And, you will be as accurate if not more accurate than most commercial alignment shops. Full instructions are included in the package.
Jerry
Jerry Work
The Dovetail Joint
Fine furniture designed and hand crafted in the 1907 former Masonic Temple building in historic Kerby, OR
glwork@mac.com
http://jerrywork.com
541-592-5360
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jerry & Sharon Work
78 Royale
Kerby, OR
|
|
|
|
| Re: [GMCnet] Alignment kits available again [message #203225 is a reply to message #203222] |
Sun, 31 March 2013 19:46  |
k2gkk
Messages: 4452
Registered: November 2009
Karma: -8
|
Senior Member |
|
|
If I am not too late, I'll buy one, Jerry.
Mac from OKC
"Money Pit"
Sent from my iPhone
On Mar 31, 2013, at 19:42, "Work Jerry" <glwork@mac.com> wrote:
Hi All,
Only two of the GMC motorhome alignment kits are left so if you want one, be sure to let me know ASAP. The redesign is quite spiffy and makes the kits much easier to store and ship around. In addition to several of the clubs and a bunch of individuals now using the alignment kit, a number of our well known GMC specialists also have one. So far the feedback has all been quite positive and the simplifications incorporated into this version 2 should make it just that much better/easier to use. I am having the turn plates drop shipped to save the duplicate shipping costs and the rest of the kit now fits into a 5 x 5 x 30 inch box. "Assembly" is just screwing in four stainless steel machine screws. Everything is now self calibrating so you are good to go right out of the box.
Best of all, I was able to lower the price from $400 to $350 if I supply the laser/angle finder or $300 if you buy that yourself locally. Flat rate shipping is $50 for addresses east of the Mississippi River, $40 for addresses west of the River and $30 for addresses in Washington, Oregon and California. Shipping to Canada or elsewhere in the world will be the actual shipping charge. Paypal to glwork@mac.com or send a check to Jerry Work, PO Box 3195, Kerby, Oregon 97531. Be sure to include your shipping address.
Your coach drove straight and true when new, and it can again without road wander or rut follow if you get the tire air pressure, ride height and alignment properly set. With this kit you can quickly check ride height front and rear, steering box centering, frame parallelism on all six wheels, camber on all six wheels along with caster and toe on the two front wheels. You can do all these checks anywhere there is a roughly level parking area yourself in less than 30 minutes. And, you will be as accurate if not more accurate than most commercial alignment shops. Full instructions are included in the package.
Jerry
Jerry Work
The Dovetail Joint
Fine furniture designed and hand crafted in the 1907 former Masonic Temple building in historic Kerby, OR
glwork@mac.com
http://jerrywork.com
541-592-5360
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] Alignment kits available again [message #203228 is a reply to message #203222] |
Sun, 31 March 2013 21:57 |
DavidF
Messages: 2
Registered: March 2013
Location: Bogata, Texas
Karma: 0
|
Junior Member |
|
|
I am sending the purchase price by PayPal and appreciate you providing the
alignment tool for our GMC. We are looking forward to using before our
vacation.
Regards,
David and Dot
On Sun, Mar 31, 2013 at 7:41 PM, Work Jerry <glwork@mac.com> wrote:
> Hi All,
>
> Only two of the GMC motorhome alignment kits are left so if you want one,
> be sure to let me know ASAP. The redesign is quite spiffy and makes the
> kits much easier to store and ship around. In addition to several of the
> clubs and a bunch of individuals now using the alignment kit, a number of
> our well known GMC specialists also have one. So far the feedback has all
> been quite positive and the simplifications incorporated into this version
> 2 should make it just that much better/easier to use. I am having the turn
> plates drop shipped to save the duplicate shipping costs and the rest of
> the kit now fits into a 5 x 5 x 30 inch box. "Assembly" is just screwing
> in four stainless steel machine screws. Everything is now self calibrating
> so you are good to go right out of the box.
>
> Best of all, I was able to lower the price from $400 to $350 if I supply
> the laser/angle finder or $300 if you buy that yourself locally. Flat rate
> shipping is $50 for addresses east of the Mississippi River, $40 for
> addresses west of the River and $30 for addresses in Washington, Oregon and
> California. Shipping to Canada or elsewhere in the world will be the
> actual shipping charge. Paypal to glwork@mac.com or send a check to
> Jerry Work, PO Box 3195, Kerby, Oregon 97531. Be sure to include your
> shipping address.
>
> Your coach drove straight and true when new, and it can again without road
> wander or rut follow if you get the tire air pressure, ride height and
> alignment properly set. With this kit you can quickly check ride height
> front and rear, steering box centering, frame parallelism on all six
> wheels, camber on all six wheels along with caster and toe on the two front
> wheels. You can do all these checks anywhere there is a roughly level
> parking area yourself in less than 30 minutes. And, you will be as
> accurate if not more accurate than most commercial alignment shops. Full
> instructions are included in the package.
>
> Jerry
>
> Jerry Work
> The Dovetail Joint
> Fine furniture designed and hand crafted in the 1907 former Masonic Temple
> building in historic Kerby, OR
> glwork@mac.com
> http://jerrywork.com
> 541-592-5360
>
>
>
>
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
| Re: [GMCnet] Alignment kits available again [message #203236 is a reply to message #203222] |
Mon, 01 April 2013 00:01 |
mickeysss
Messages: 1476
Registered: January 2012
Karma: 0
|
Senior Member |
|
|
I see mac stating he wants one, and david folkers also, does this mean it is gone? Do you have three David folkers state
they sent the money? I like mac i do not want to block him? Let me know what you want me to do?
714 642 5399
mickey
On Mar 31, 2013, at 5:41 PM, Work Jerry wrote:
> Hi All,
>
> Only two of the GMC motorhome alignment kits are left so if you want one, be sure to let me know ASAP. The redesign is quite spiffy and makes the kits much easier to store and ship around. In addition to several of the clubs and a bunch of individuals now using the alignment kit, a number of our well known GMC specialists also have one. So far the feedback has all been quite positive and the simplifications incorporated into this version 2 should make it just that much better/easier to use. I am having the turn plates drop shipped to save the duplicate shipping costs and the rest of the kit now fits into a 5 x 5 x 30 inch box. "Assembly" is just screwing in four stainless steel machine screws. Everything is now self calibrating so you are good to go right out of the box.
>
> Best of all, I was able to lower the price from $400 to $350 if I supply the laser/angle finder or $300 if you buy that yourself locally. Flat rate shipping is $50 for addresses east of the Mississippi River, $40 for addresses west of the River and $30 for addresses in Washington, Oregon and California. Shipping to Canada or elsewhere in the world will be the actual shipping charge. Paypal to glwork@mac.com or send a check to Jerry Work, PO Box 3195, Kerby, Oregon 97531. Be sure to include your shipping address.
>
> Your coach drove straight and true when new, and it can again without road wander or rut follow if you get the tire air pressure, ride height and alignment properly set. With this kit you can quickly check ride height front and rear, steering box centering, frame parallelism on all six wheels, camber on all six wheels along with caster and toe on the two front wheels. You can do all these checks anywhere there is a roughly level parking area yourself in less than 30 minutes. And, you will be as accurate if not more accurate than most commercial alignment shops. Full instructions are included in the package.
>
> Jerry
>
> Jerry Work
> The Dovetail Joint
> Fine furniture designed and hand crafted in the 1907 former Masonic Temple building in historic Kerby, OR
> glwork@mac.com
> http://jerrywork.com
> 541-592-5360
>
>
>
>
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
Goto Forum:
Current Time: Mon Nov 18 16:13:49 CST 2024
Total time taken to generate the page: 0.01160 seconds
|
GMCforum
Search
Help
Register
Login
Home
