GMCforum: GMCnet » Thetford China Bowl Toilet Seal

Home » Public Forums » GMCnet » Thetford China Bowl Toilet Seal

Show: Today's Messages :: Polls :: Message Navigator

Thetford China Bowl Toilet Seal [message #203099]

Sat, 30 March 2013 17:21

WD0AFQ

Messages: 7111
Registered: November 2004
Location: Dexter, Mo.

Karma: 207

Senior Member

We have a nice Thetford China Bowl toilet. I can not find the model number anywhere on the thing. We did not get the front cover so it might have been there. The seal on the "ball" slider is leaking and will not hold water in the bowl. I can see a big gap. Before I was able to use silicone spray to seal it but this time the gap is way too wide. I think it is the Aqua V. Tall model with only one foot pedal. I gather this from pictures on Thetford website. I notice different part numbers for different versions of the toilet for the seal. I have emailed Thetford but no word from them yet.
Anyone had to replace the seal before? I always keep fluid in the bowl but this winter it leaked out and I did not notice it.
Thanks,
Dan

3 In Stainless Exhaust Headers One Ton All Discs/Reaction Arm 355 FD/Quad Bag/Alum Radiator Manny Tran/New eng. Holley EFI/10 Tire Air Monitoring System Solarized Coach/Upgraded Windows Satelite TV/On Demand Hot Water/3Way Refer

Report message to a moderator

Re: [GMCnet] Thetford China Bowl Toilet Seal [message #203104 is a reply to message #203099]

Sat, 30 March 2013 17:45

hnielsen2

Messages: 1434
Registered: February 2004
Location: Alpine CA

Karma: 0

Senior Member

Dan;
Remove the plastic cover around the bottom of you toilet.
You will see the model number.
You can buy the replacement gasket at you local R V store.
How do I know?
We replace ours last month.
All is well with my Lord
Howard
The best argument against democracy is a five minute conversation with the
average voter
(Winston Churchill)

----- Original Message -----
From: "Dan Gregg" <gregg_dan@hotmail.com>
To: <gmclist@temp.gmcnet.org>
Sent: Saturday, March 30, 2013 15:21
Subject: [GMCnet] Thetford China Bowl Toilet Seal

>
>
> We have a nice Thetford China Bowl toilet. I can not find the model number
> anywhere on the thing. We did not get the front cover so it might have
> been there. The seal on the "ball" slider is leaking and will not hold
> water in the bowl. I can see a big gap. Before I was able to use silicone
> spray to seal it but this time the gap is way too wide. I think it is the
> Aqua V. Tall model with only one foot pedal. I gather this from pictures
> on Thetford website. I notice different part numbers for different
> versions of the toilet for the seal. I have emailed Thetford but no word
> from them yet.
> Anyone had to replace the seal before? I always keep fluid in the bowl but
> this winter it leaked out and I did not notice it.
> Thanks,
> Dan
> --
> Dan & Teri Gregg
> Dexter, Mo.
>
> http://danandteri.blogspot.com/
>
>
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

All is well with my Lord

Report message to a moderator

Re: [GMCnet] Thetford China Bowl Toilet Seal [message #203111 is a reply to message #203104]

Sat, 30 March 2013 18:29

WD0AFQ

Messages: 7111
Registered: November 2004
Location: Dexter, Mo.

Karma: 207

Senior Member

Howard, we did not get the front plastic cover with the toilet. Bought it used. I guess the model is on that plastic.
dan

Report message to a moderator

Re: [GMCnet] Thetford China Bowl Toilet Seal [message #203173 is a reply to message #203099]

Sun, 31 March 2013 08:13

USAussie

Messages: 15912
Registered: July 2007
Location: Sydney, Australia

Karma: 6

Senior Member

Dan,

Where is (are) the foot pedal(s) on your Thetford?

How do they work?

Push down halfway to fill bowl / fully to flush?

Take a picture of the mechanisms on the sides / back and I'll try and figger out what model you have.

Regards,
Rob M.

-----Original Message-----
From: Dan Gregg

We have a nice Thetford China Bowl toilet. I can not find the model number anywhere on the thing. We did not get the front cover so
it might have been there. The seal on the "ball" slider is leaking and will not hold water in the bowl. I can see a big gap. Before
I was able to use silicone spray to seal it but this time the gap is way too wide. I think it is the Aqua V. Tall model with only
one foot pedal. I gather this from pictures on Thetford website. I notice different part numbers for different versions of the
toilet for the seal. I have emailed Thetford but no word from them yet.
Anyone had to replace the seal before? I always keep fluid in the bowl but this winter it leaked out and I did not notice it.
Thanks,
Dan

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Regards, Rob M. (USAussie) The Pedantic Mechanic Sydney, Australia '75 Avion - AUS - The Blue Streak TZE365V100428 '75 Avion - USA - Double Trouble TZE365V100426

Report message to a moderator

Re: [GMCnet] Thetford China Bowl Toilet Seal [message #203175 is a reply to message #203173]

Sun, 31 March 2013 08:37

WD0AFQ

Messages: 7111
Registered: November 2004
Location: Dexter, Mo.

Karma: 207

Senior Member

Robert Mueller wrote on Sun, 31 March 2013 08:13

Yes Rob, you have it pictured correctly. Think it is Aqua V but not sure.
Dan

Report message to a moderator

Re: [GMCnet] Thetford China Bowl Toilet Seal [message #203176 is a reply to message #203099]

Sun, 31 March 2013 08:44

Steven Ferguson

Messages: 3447
Registered: May 2006

Karma: 0

Senior Member

Sorry Dan,
I kept thinking you were referring to the seal underneath the commode, not
the ball seal. Just remove the old one and take it with you to the RV
parts store.

On Sat, Mar 30, 2013 at 3:21 PM, Dan Gregg <gregg_dan@hotmail.com> wrote:

>
>
> We have a nice Thetford China Bowl toilet. I can not find the model number
> anywhere on the thing. We did not get the front cover so it might have been
> there. The seal on the "ball" slider is leaking and will not hold water in
> the bowl. I can see a big gap. Before I was able to use silicone spray to
> seal it but this time the gap is way too wide. I think it is the Aqua V.
> Tall model with only one foot pedal. I gather this from pictures on
> Thetford website. I notice different part numbers for different versions of
> the toilet for the seal. I have emailed Thetford but no word from them yet.
> Anyone had to replace the seal before? I always keep fluid in the bowl but
> this winter it leaked out and I did not notice it.
> Thanks,
> Dan
> --
> Dan & Teri Gregg
> Dexter, Mo.
>
> http://danandteri.blogspot.com/
>
>
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>

--
Take care,
Steve
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] Thetford China Bowl Toilet Seal [message #203195 is a reply to message #203176]

Sun, 31 March 2013 12:12

WD0AFQ

Messages: 7111
Registered: November 2004
Location: Dexter, Mo.

Karma: 207

Senior Member

Thanks Steve. I guess there is a way to get the bowl loose from the base. Will take a look this afternoon. Thanks to those who emailed me also.
Dan

Report message to a moderator

Previous Topic:	Buzz Box Question
Next Topic:	[GMCnet] Non GMC// Wine vs gas prices

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Nov 19 00:24:07 CST 2024

Total time taken to generate the page: 0.08483 seconds