GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] Ride height
[GMCnet] Ride height [message #200692] Tue, 05 March 2013 10:01 Go to previous message
Gerald Work is currently offline  Gerald Work   United States
Messages: 102
Registered: June 2010
Karma:
Senior Member
Different coaches will respond differently to turns on the adjuster. Rear ride height, weight balance and resilience of the torsion bars all,play a role in determining how much ride height will change for a given number of turns on the adjuster bolt. My experience is six turns per inch is about right on average, but not for any one given coach. Be sure to only make changes after unloading the torsion bar with the proper tool and the coach securely supported by strong stands. If you just crank on the adjuster bolt you will strip it out. Also, watch carefully to make sure the adjuster does not bottom out on the top of the cross member. Some coaches will need an offset pork chop while others may get by with a longer adjuster bolt with the stock pork chops and still others will adjust properly via the stock adjuster bolt. Measure and set rear first, then safely measure and adjust the front, drive a few miles, remeasure both, safely adjust a bit more if necessary, drive a
few miles, remeasure both, etc. seems laborious but you will eventually get it right. All but two coaches coming to the GMCWS Casa de Fruta rally were low front, rear or both. Yours likely is as well. Stock ride height is critical to make your coach drive straight and true. If you want more info, download for free and read my presentation which you can find on the GMC page on my web site (http://jerrywork.com) or from the GMCWS web site.

Jerry

Jerry Work
The Dovetail Joint
Fine furniture designed & hand crafted
in the 1907 former Masonic Temple building
in historic Kerby, OR
Http://jerrywork.com
........
Message: 5
Date: Mon, 04 Mar 2013 22:35:09 -0600
From: Dan Borlase <bord@shaw.ca>
Subject: Re: [GMCnet] RIDE HEIGHT
To: gmclist@temp.gmcnet.org
Message-ID: <30fcb.513575fd@gmc.mybirdfeeder.net>
Content-Type: text/plain; charset="ISO-8859-15"



Gary...do let us know how "accurate" 6 turns is...Dan
.........
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

 
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] RIDE HEIGHT
Next Topic: GMC Ice Maker
Goto Forum:
  


Current Time: Sun Oct 06 05:26:48 CDT 2024

Total time taken to generate the page: 0.03065 seconds