GMCforum: GMCnet » Fuel tank wiring loom

Home » Public Forums » GMCnet » Fuel tank wiring loom (missing length of wiring loom fuel selector valve)

Show: Today's Messages :: Polls :: Message Navigator

Fuel tank wiring loom [message #198868]

Mon, 18 February 2013 10:28

Jack Ramsey

Messages: 82
Registered: December 2012
Location: Tulare, CA

Karma:

Member

I have wiring diagrams, faded old real factory service manual and multiple Fluke multi-meters.
In the drivers side of my 1975 Palm beach there is a fuel selector valve and the 3 wires, black, tan-white and tan, from the connectors (connectors in place) are broken off about 12 in forward and were zip tied to the fuel "manifold" running forward to what I assume is the filler assembly.

My question is which direction do these run forward to the dash selector switch? I am assuming they got caught on an obstacle and got broken. I see nothing within the radius of the cut to give me an hint.

Loom rearward to the fuel pickups and senders intact.

Thank You,

Jack

Jack Ramsey Tulare, CA TZE165V101526 1975 Palm Beach

Report message to a moderator

[Message index]

		Fuel tank wiring loom By: Jack Ramsey on Mon, 18 February 2013 10:28
		Re: Fuel tank wiring loom By: Matt Colie on Mon, 18 February 2013 12:26
		Re: Fuel tank wiring loom By: Jack Ramsey on Mon, 18 February 2013 21:35
		Re: Fuel tank wiring loom By: midlf on Mon, 18 February 2013 22:03
		Re: Fuel tank wiring loom By: Jack Ramsey on Mon, 18 February 2013 23:56

Previous Topic:	The future of the GMC depends on GMCnet making a market for it
Next Topic:	GMC Steering Column and Chuck Boyd

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Oct 07 01:29:35 CDT 2024

Total time taken to generate the page: 0.00685 seconds