GMCforum: GMCnet » 12 volt fuse panel power source

Home » Public Forums » GMCnet » 12 volt fuse panel power source (where does it come from?)

Show: Today's Messages :: Polls :: Message Navigator

12 volt fuse panel power source [message #197089]

Fri, 01 February 2013 15:07

Hot wheels

Messages: 9
Registered: April 2010
Location: Holiday City Ohio

Karma:

Junior Member

I just noticed that my fuel and temp gauges were not working and upon a little further research I discovered about 1/2 the fuse panel in the glove box does not have power. I checked the red wires coming in ot he outside half of the firewall block and I think those are probably ok but no power on the inside. My guess is that its a 2 piece firewall block and if i pull it apart i can clean some contacts or somethign to get power back. Anyone had trouble with this?

I dont have a lot of time to diagnose and repair it tonight and was just looking for a heads up as to what it might be. Been playing with this old gmc for 30 years and i dont ever remember having to mess with the 12 volt fuse panel in the glove box for problems other than a blown fuse once in a blue moon.

Sean

Report message to a moderator

[Message index]

		12 volt fuse panel power source By: Hot wheels on Fri, 01 February 2013 15:07
		Re: 12 volt fuse panel power source By: Harry on Fri, 01 February 2013 18:01

Previous Topic:	GMC sighting in Key West, FL
Next Topic:	Ethanol (again)

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Oct 14 11:20:57 CDT 2024

Total time taken to generate the page: 0.00667 seconds