[GMCnet] Apology to Mickey SSS [message #194817] |
Fri, 04 January 2013 15:54 |
|
USAussie
Messages: 15912 Registered: July 2007 Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Mickey,
I owe you an apology; turns out I was confused not you!
I reviewed the information published on the GMCnet in "MaxxFan on Sale" and YOU are correct and I was wrong!
The rear of the lid extends 8 inches behind the hole. As it opens it pivots from the front which is why they state 7 1/2 inches
clearance is required behind it.
I screwed up for two reasons:
1) For some stupid reason I thought the front to rear dimension of the MaxxFan was 14 inches and that's impossible.
2) I installed a second A/C on Double Trouble and to do so the rear rail of the "luggage" rack had to be cut. I assumed that the
MaxxFan was smaller than the A/C (it is) and that would not be necessary. I also assumed that there is enough distance from the back
of the hole to the rear rail for the cover to lift when opened. I assumed your GMC was the same as my Avion and since you measured
yours I am incorrect there too!
SORRY for confusing YOU!
Regards,
Rob M.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|