GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Onan Bridge Rectifier replacement - wiring help
Onan Bridge Rectifier replacement - wiring help [message #193429] Thu, 20 December 2012 10:51 Go to previous message
75realsteel is currently offline  75realsteel   United States
Messages: 26
Registered: December 2012
Location: Chicago
Karma:
Junior Member
Hi All -
I'm new to the forum after having purchased a 75 EleganzaII a few months back. Thanks to all for creating a great repository of helpful information!

I'm in the process of getting my Onan 6K up and running. After replacing the control board, she fired up and ran just fine. I was getting AC at the outlets for a short time before it cut out, so I decided to first change the Bridge Rectifier. While trying to get the old BR out, one of the wires which connect to the "AC" plug on the BR came loose from the Onan and I'm not exactly sure where it came loose from. I'd rather get some feedback from folks who know before causing further problems Smile

The wire in question is shown here - it's the shorter white "AC" wire:
http://www.gmcmhphotos.com/photos/onan/p46845-bridge-rectifier-holder-removed.html

I'm guessing it attaches to one of the bottom brush leads shown here:
http://www.gmcmhphotos.com/photos/onan/p46846-bottom-brush.html

The other "AC" lead is a longer black wire - it's shown here for completeness:
http://www.gmcmhphotos.com/photos/onan/p46847-bridge-rectifier-removed.html

thanks for any help -
Kevin


'77 Kingsley 26 - Chicago, IL

[Updated on: Thu, 20 December 2012 10:52]

Report message to a moderator

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Laptop Computer
Next Topic: [GMCnet] Harbor Freight Tool Box
Goto Forum:
  


Current Time: Sun Sep 29 18:15:16 CDT 2024

Total time taken to generate the page: 0.01630 seconds