Re: [GMCnet] Brass carb float. What's the part # [message #192731] |
Mon, 10 December 2012 17:22 |
emerystora
Messages: 4442 Registered: January 2004
Karma: 13
|
Senior Member |
|
|
Bob
You had told me that you were looking for a brass float.
The part number for the QJ float is 7046300. However it is not brass.
As far as I know,l Q-Jets, all used NitriFill floats. Brass floats are aftermarket replacements installed by people who don't know correct Q-Jet setup.
If you should put in a brass replacement you should set the float height at a different level due to the weight of the float.
The original float on very early (back in the 60's) QJ carb was a 7034454 but they did have problems with it becoming fuel logged. When those are replaced with the 7046300 it was necessary to set the float about 1/16" higher because the float is larger than the original one. This was before the time of the GMC motorhomes though.
I know there are brass replacements but they really are not needed as the 7046300 should never get fuel logged.
Emery Stora
77 Kingslley
Frederick, CO
On Dec 10, 2012, at 10:34 AM, Bob Dunahugh wrote:
>
> I'm rebuilding the carb in a friends 78 GMC. I'm not finding the brand or part #. Bob Dunahugh
> _______________________________________________
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|