GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Louvers in inner fender
Louvers in inner fender [message #192342] Wed, 05 December 2012 20:08 Go to previous message
kerry pinkerton is currently offline  kerry pinkerton   United States
Messages: 2565
Registered: July 2012
Location: Harvest, Al
Karma:
Senior Member
I have a good metalshaping buddy that has a louver press. I asked him to make up some aluminum louvers. The first set is going into the inner front wheel liners. The album is here:

http://www.gmcmhphotos.com/photos/louvers/p46696-b-001.html

This is the panel and where I'm going to put it.

http://www.gmcmhphotos.com/photos/data/6244/B_001.jpg
http://www.gmcmhphotos.com/photos/data/6244/B_001.jpg

The hole was cut a bit smaller with a sabersaw.

http://www.gmcmhphotos.com/photos/data/6244/B_002.jpg
http://www.gmcmhphotos.com/photos/data/6244/B_002.jpg

Drilled some 1/8" holes and pop riveted it in place.

http://www.gmcmhphotos.com/photos/data/6244/B_004.jpg
http://www.gmcmhphotos.com/photos/data/6244/B_004.jpg

Here is the left side installed.

http://www.gmcmhphotos.com/photos/data/6244/B_006.jpg
http://www.gmcmhphotos.com/photos/data/6244/B_006.jpg

Don't know how much this will help but I can't see it hurting. I'll give a report after my next drive. My buddy will make this if others want some.

I also asked him to make a smaller set with the idea of replacing the stainless louvers on the outside.

http://www.gmcmhphotos.com/photos/data/6244/B_007.jpg
http://www.gmcmhphotos.com/photos/data/6244/B_007.jpg

Nothing wrong with the stainless ones I'm just being different because I can... Very Happy I'm not sure they will fit. I may need to use a different size because of some of the internal structure. I'll look at it before I put the other fender liner in tomorrow.


Kerry Pinkerton - North Alabama Had 5 over the years. Currently have a '06 Fleetwood Discovery 39L
 
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Avion 120 VAC System
Next Topic: Water heater timer
Goto Forum:
  


Current Time: Wed Sep 25 00:26:33 CDT 2024

Total time taken to generate the page: 0.00894 seconds