GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMC Swap Meet » Spray on Lubricate
Spray on Lubricate [message #191668] Thu, 29 November 2012 19:24 Go to previous message
Bruce Hart is currently offline  Bruce Hart   United States
Messages: 1501
Registered: October 2011
Location: La Grange, Wyoming
Karma:
Senior Member
Thought I would pass this on to everyone. Where I work we use a Dow Corning product called "MolyKote" G-N Metal Assembly Spray
This product could be the answer to exhaust manifold bolts, and or manifold bolts that gall up or just hard to turn out. We use it under high torque and high temperature (500+ degrees) conditions.

Properties:
Excellent protection against fretting wear and corrosion
Extends service life
Low friction
Lubricate beyond the yield point of most metals in boundary applications, reducing wear and helping to prevent seizing, galling and excessive friction
Aid run-in and reduce frictional force and surface damage
Low coefficient of friction allows for effective conversion of
torquing force into holding force; reduces the force required for
disassembly of threaded fasteners

COMPOSITION
Solid lubricants in mineral oil (with non-chlorofluorohydrocarbon
propellant in aerosol

http://www.dowcorning.com/content/publishedlit/090007c88023f09d.pdf

Find a Distributor:
http://www.dowcorning.com/applications/DistributorFinder/Default.aspx?prod_id=01889877&prod_ids=PROD&country=USA&language=E



Bruce Hart 1976 Palm Beach 1977 28' Kingsley La Grange, Wyoming

[Updated on: Thu, 29 November 2012 19:27]

Report message to a moderator

 
Read Message
Read Message
Read Message
Previous Topic: Frame Parts +
Next Topic: Wanted: rearview mirror
Goto Forum:
  


Current Time: Tue Nov 19 19:54:12 CST 2024

Total time taken to generate the page: 0.02117 seconds