GMCforum: GMCnet » Cabinet Question

Home » Public Forums » GMCnet » Cabinet Question (Trying To Squeeze A Refrigerator Into A Stock Cabinet)

Show: Today's Messages :: Polls :: Message Navigator

Cabinet Question [message #190900]

Tue, 20 November 2012 19:40

A Hamilto

Messages: 4508
Registered: April 2011

Karma:

Senior Member

Talking about a 23'-2 like this

http://www.gmcmhphotos.com/photos/data/6131/medium/Floor_Plan_Original.jpg

The refrigerator cabinet is across from the "oven & range".
The edge that is against the dinette seems to be about 1/2" thick.
The part between the fridge and drawers seems to be 3/4" against the fridge with another layer of 1/2" on the drawer side.
Is the 3/4" plywood OEM, or did a PO put it there as filler?
I need the cabinet to be 3/4" wider than it is to squeeze in the refrigerator I want to install. Would like to remove the 3/4" plywood, but not sure the cabinet would be sturdy enough if I do.
Ideas?

Report message to a moderator

[Message index]

		Cabinet Question By: A Hamilto on Tue, 20 November 2012 19:40
		Re: Cabinet Question By: Dennis S on Tue, 20 November 2012 21:30
		Re: [GMCnet] Cabinet Question By: USAussie on Tue, 20 November 2012 21:35
		Re: Cabinet Question By: RadioActiveGMC on Tue, 20 November 2012 23:44
		Re: Cabinet Question By: Matt Colie on Wed, 21 November 2012 09:10
		Re: Cabinet Question By: A Hamilto on Wed, 21 November 2012 12:43
		Re: Cabinet Question By: Cadillackeeper on Wed, 21 November 2012 09:26

Previous Topic:	[GMCnet] GMC covers
Next Topic:	[GMCnet] Mobile City Hall Coach (Minnesota?)

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Mar 17 08:49:45 CDT 2025

Total time taken to generate the page: 0.00488 seconds