GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Re: [GMCnet] Finally Posted Drawings Of What I Have And What I Want
Re: [GMCnet] Finally Posted Drawings Of What I Have And What I Want [message #189693] Thu, 08 November 2012 23:02 Go to previous message
gene1 is currently offline  gene1   United States
Messages: 50
Registered: February 2004
Location: Southern California
Karma:
Member
A.
I bought my sofa from Eurotec on 7 Nov 2001 for $535.00 and I picked it up
at the factory. I paid extra to get it longer, reaches from the kitchen to
above the front step.
A width greater than 47 or 48 inches takes up most of the aisle up forward.
To get a wider jack knife sofa in a GMC you would have to put it cross wise,
thus no aisle, front to back.
I have a full size bed in the back cross wise, very comfortable, but the
person next to the window can't get out unless the person up front gets up
too. A particular problem also if you have claustophobia.
Good luck on your project.
Gene, 76 Eleganza North County San Diego
----- Original Message -----
From: "gene1@daygotours" <gene1@daygotours.com>
To: <gmclist@temp.gmcnet.org>
Sent: Tuesday, November 06, 2012 6:17 PM
Subject: Re: [GMCnet] Finally Posted Drawings Of What I Have And What I Want


> There is an outfit in the LA area, Eurotec, 562 806 6171, that made me a
> jack knife sofa, 75 x 47 that fits my eleganza behind the drivers seat.
> They custom make beds for trucks, vans and RV's. You might call them for
> a quote, they ship throughout the country. Mine is very high quality.
> Regards,
> Gene 76 Eleganza, north county San Diego
>
> ----- Original Message -----
> From: "A." <markbb1@netzero.com>
> To: <gmclist@temp.gmcnet.org>
> Sent: Sunday, November 04, 2012 5:56 PM
> Subject Re: [GMCnet] Finally Posted Drawings Of What I Have And What I
> Want
>
>
>>
>>
>> I took some measurements and did some web searching.
>> For the sofa/sleeper behind the driver's seat, I am looking for a "short
>> queen" (aka "rv queen") jack knife sofa.
>> I didn't have a lot of luck finding one, and couldn't really tell if they
>> exist as a non-custom article.
>> As a sofa, it would be 75" long, folded out to a bed it would be 75" long
>> and 60" wide.
>> Anybody ever seen or heard of such a thing?
>> --
>> '73 23' Sequoia
>> UA (Upper Alabama)
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclistr
>

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: 1976 GMC Palm Beach $10.5k (Gaston, NC)
Next Topic: [GMCnet] I raised them right..
Goto Forum:
  


Current Time: Sun Mar 16 12:20:05 CDT 2025

Total time taken to generate the page: 0.00762 seconds