GMCforum: GMCnet » water pump shaft size

Home » Public Forums » GMCnet » water pump shaft size

Show: Today's Messages :: Polls :: Message Navigator

water pump shaft size [message #189495]

Wed, 07 November 2012 18:03

Wayne

Messages: 106
Registered: August 2004

Karma:

Senior Member

Hi,

I installed my SPARE water pump the other day. Today, while I was finishing up I found the shaft is 3/4" and the hole in the pulley is 5/8". The hole in the fan clutch is 3/4". It is a heavy duty (A1 cardone).

I drilled the hole in the pully out to 3/4".

I should have posted before I drilled, but was in a hurry finish.

Better late than never.

Thoughts?

Wayne

Wayne Lawrence
76 Birchaven
Bellflower CA
w.lawrence@verizon.net

Report message to a moderator

[Message index]

		water pump shaft size By: Wayne on Wed, 07 November 2012 18:03
		Re: water pump shaft size By: C Boyd on Wed, 07 November 2012 19:15
		Re: water pump shaft size By: C Boyd on Wed, 07 November 2012 19:17
		Re: [GMCnet] water pump shaft size By: USAussie on Wed, 07 November 2012 23:30

Previous Topic:	403 car vs. motorhome engine
Next Topic:	Gauges for a new dash

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Oct 08 00:32:08 CDT 2024

Total time taken to generate the page: 0.07911 seconds