water pump shaft size [message #189495] |
Wed, 07 November 2012 18:03 |
Wayne
Messages: 106 Registered: August 2004
Karma: 0
|
Senior Member |
|
|
Hi,
I installed my SPARE water pump the other day. Today, while I was finishing up I found the shaft is 3/4" and the hole in the pulley is 5/8". The hole in the fan clutch is 3/4". It is a heavy duty (A1 cardone).
I drilled the hole in the pully out to 3/4".
I should have posted before I drilled, but was in a hurry finish.
Better late than never.
Thoughts?
Wayne
Wayne Lawrence
76 Birchaven
Bellflower CA
w.lawrence@verizon.net
|
|
|
Re: water pump shaft size [message #189513 is a reply to message #189495] |
Wed, 07 November 2012 19:15 |
C Boyd
Messages: 2629 Registered: April 2006
Karma: 18
|
Senior Member |
|
|
Sir: I think you did what you could and all should be well. The last fan clutch (999747) I bought had a 5/8 hole with a 3/4 adapter. First one of those I`ve seen. Consolidation of parts I figure.
Wayne wrote on Wed, 07 November 2012 19:03 | Hi,
I installed my SPARE water pump the other day. Today, while I was finishing up I found the shaft is 3/4" and the hole in the pulley is 5/8". The hole in the fan clutch is 3/4". It is a heavy duty (A1 cardone).
I drilled the hole in the pully out to 3/4".
I should have posted before I drilled, but was in a hurry finish.
Better late than never.
Thoughts?
Wayne
|
C. Boyd
76 Crestmont
East Tennessee
|
|
|
Re: water pump shaft size [message #189514 is a reply to message #189513] |
Wed, 07 November 2012 19:17 |
C Boyd
Messages: 2629 Registered: April 2006
Karma: 18
|
Senior Member |
|
|
uurrrr.. should read had 3/4 hole with 5/8 adapter.
C Boyd wrote on Wed, 07 November 2012 20:15 | Sir: I think you did what you could and all should be well. The last fan clutch (999747) I bought had a 5/8 hole with a 3/4 adapter. First one of those I`ve seen. Consolidation of parts I figure.
Wayne wrote on Wed, 07 November 2012 19:03 | Hi,
I installed my SPARE water pump the other day. Today, while I was finishing up I found the shaft is 3/4" and the hole in the pulley is 5/8". The hole in the fan clutch is 3/4". It is a heavy duty (A1 cardone).
I drilled the hole in the pully out to 3/4".
I should have posted before I drilled, but was in a hurry finish.
Better late than never.
Thoughts?
Wayne
|
|
C. Boyd
76 Crestmont
East Tennessee
|
|
|
Re: [GMCnet] water pump shaft size [message #189567 is a reply to message #189514] |
Wed, 07 November 2012 23:30 |
|
USAussie
Messages: 15912 Registered: July 2007 Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Chuck,
The fan clutch I pulled off Double Trouble at Marc's home was the same, it wasn't new.
Regards,
Rob M.
-----Original Message-----
From: Charles Boyd
uurrrr.. should read had 3/4 hole with 5/8 adapter.
C Boyd wrote on Wed, 07 November 2012 20:15
> Sir: I think you did what you could and all should be well. The last fan clutch (999747) I bought had a 5/8 hole with a 3/4
adapter. First one of those I`ve seen. Consolidation of parts I figure.
C. Boyd
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|