GMCforum: GMCnet » [GMCnet] Advise on best Route

Home » Public Forums » GMCnet » [GMCnet] Advise on best Route

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Advise on best Route [message #188112]

Wed, 24 October 2012 14:59

Dwayne

Messages: 418
Registered: October 2007
Location: White Rock BC

Karma:

Senior Member

We are now in Las Vegas and tomorrow our next major stop (one in between
overnight) is at Jim Hupy's in Salem Oregon.
is it best to 15 south west then over to 5 or how about 95 North through
Reno.
Not sure about grades on the 95 North and condition of road.

--
Dwayne and Sharon Jacobson
White Rock
77 Kingsley
over 12000 miles so far since Aug 6th.
you can read about it on www.roadhousegrille.ca
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Dwayne & Sharon Jacobson
White Rock, BC
77 Eleganza II

Report message to a moderator

[Message index]

		[GMCnet] Advise on best Route By: Dwayne on Wed, 24 October 2012 14:59
		Re: [GMCnet] Advise on best Route By: armandminnie on Wed, 24 October 2012 15:38
		Re: [GMCnet] Advise on best Route By: Steven Ferguson on Thu, 25 October 2012 08:29
		Re: [GMCnet] Advise on best Route By: roy1 on Wed, 24 October 2012 15:40
		Re: [GMCnet] Advise on best Route By: roy1 on Wed, 24 October 2012 20:49
		Re: [GMCnet] Advise on best Route By: Adrien G. on Wed, 24 October 2012 23:45
		Re: [GMCnet] Advise on best Route By: George Beckman on Wed, 24 October 2012 18:14
		Re: [GMCnet] Advise on best Route By: jimtze on Wed, 24 October 2012 19:00
		Re: [GMCnet] Advise on best Route By: mike miller on Thu, 25 October 2012 12:01
		Re: [GMCnet] Advise on best Route By: Dwayne on Thu, 25 October 2012 12:36
		Re: [GMCnet] Advise on best Route By: mike miller on Thu, 25 October 2012 19:57
		Re: [GMCnet] Advise on best Route By: roy1 on Thu, 25 October 2012 20:44

Previous Topic:	Thoughts on The risk of publishing GMC info on Social Media
Next Topic:	Transmission pan gasket

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Oct 08 07:36:19 CDT 2024

Total time taken to generate the page: 0.01051 seconds