| can anyone identify this wire found in the engine bay? [message #185966] |
Sun, 30 September 2012 03:25 |
midlf
Messages: 2212
Registered: July 2007
Location: SE Wisc. (Palmyra)
Karma:
|
Senior Member |
|
|
I agree with Chuck, he's a klever feller! 
If you appreciate the help you're getting please DO start a new thread if you have a new subject. It makes it easier to follow.
Regards,
Rob M.
-----Original Message-----
From: Charles Boyd
Sir: below to the left on the frame is the brake proportioning valve with a brake light sensor. Probably goes there.
bronevaya wrote on Sat, 29 September 2012 14:45
> I don't want to start a new thread but can anyone identify this wire found in the engine bay?
>
> https://www.dropbox.com/s/glkhxtj53nuhdu6/IMG_20120929_120552.jpg
>
> I also want to thank you all for the help you have been providing me. this is one of the best forums I have been a part of. Thank
you again!!
--
C. Boyd
It's very easy to start a new thread, and as noted it will get your problem more attention.
I also agree that the wire is for the brake proportioning valve. It is somewhat easy to inadvertently disconnect. If you connect it and your brake warning light on the panel comes on you have a different problem which can be addressed. (If that light comes on a PO took the easy way out to make the problem "go away" NOT.)
Steve Southworth
1974 Glacier TZE064V100150 (for workin on)
1975 Transmode TZE365V100394 (parts & spares)
Palmyra WI
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
