Home » Public Forums » GMCnet » [Gmcnet] Bogie greasers
|
|
| Re: [Gmcnet] Bogie greasers [message #18582 is a reply to message #18581] |
Wed, 13 August 2008 16:55   |
jessfarr
Messages: 100
Registered: August 2004
Karma: 1
|
Senior Member |
|
|
Well, doesn't have to be; but, just sort of depends upon whether you want to
do a good job or not. Works better if move wheels around and let grease work
in. IMHO, of course.
jofarr, soddy tn '74 canyonlands 26/3
FLY THE FLAG - http://tinyurl.com/63pfns
www.GMCers.org
----- Original Message -----
From: "kenneth hugelier" <kahugelier@sbcglobal.net>
> In following the line about the dual zirc bogie
> greasers, I noted that someone said the coach did not
> have to be raised to grease the bogie pins. Is this
> true? This is counter to what I had understood.
_______________________________________________
Gmcnet mailing list
Gmcnet@
http://mail.gmcers.org/mailman/listinfo/gmcnet_gmcers.org
jesse farr, soddy tn USA '74 Canyonlands 260
|
|
|
|
|
|
| Re: [GMCnet] bogie grease [message #152003 is a reply to message #151991] |
Tue, 06 December 2011 23:10 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
I'm in Stockton,CA attending the Generac class on generator training.
I thought it would be a easy course, but it is tougher than I expected.
They charged me $500 and are going to pound in that much knowledge.
Being a 69 year old does not make it easy.
Something basic as a OHM's law had me scratching my you know what.
I need to get 80% on the test tomorrow. Wish me luck.
On Tue, Dec 6, 2011 at 8:00 PM, <sgltrac@gmail.com> wrote:
> Thanks Jim!!! Where is "out of town"
>
> Sully
> 77 royale
> ------Original Message------
> From: Jim Kanomata
> Sender: gmclist-bounces@temp.gmcnet.org
> To: gmclist@temp.gmcnet.org
> ReplyTo: gmclist@temp.gmcnet.org
> Subject: Re: [GMCnet] bogie grease
> Sent: Dec 6, 2011 7:57 PM
>
> The 1 1/2 pins use 4 bushings per pin.
>
> On Tue, Dec 6, 2011 at 4:49 PM, sgltrac <sgltrac@gmail.com> wrote:
>>
>>
>> Yes on the Reamer. The Jim K kit only takes two bushings per bogie as opposed to the stock four. I asked and was told that they are wider....
>> --
>> Sully
>> 77 Royale basket case.
>> Future motorhome land speed record holder(bucket list)
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
>
>
> --
> Jim Kanomata
> Applied/GMC, Fremont,CA
> jimk@appliedairfilters.com
> http://www.appliedgmc.com
> 1-800-752-7502
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
>
> Sent from my Verizon Wireless BlackBerry
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| Re: [GMCnet] bogie grease [message #152010 is a reply to message #152003] |
Wed, 07 December 2011 00:25 |
sgltrac
Messages: 2797
Registered: April 2011
Karma: 1
|
Senior Member |
|
|
Good luck although I doubt you'll need it.
Sully
77 royale
Sent from my Verizon Wireless BlackBerry
-----Original Message-----
From: Jim Kanomata <jimkanomata@gmail.com>
Sender: gmclist-bounces@temp.gmcnet.org
Date: Tue, 6 Dec 2011 21:10:03
To: <gmclist@temp.gmcnet.org>
Reply-To: gmclist@temp.gmcnet.org
Subject: Re: [GMCnet] bogie grease
I'm in Stockton,CA attending the Generac class on generator training.
I thought it would be a easy course, but it is tougher than I expected.
They charged me $500 and are going to pound in that much knowledge.
Being a 69 year old does not make it easy.
Something basic as a OHM's law had me scratching my you know what.
I need to get 80% on the test tomorrow. Wish me luck.
On Tue, Dec 6, 2011 at 8:00 PM, <sgltrac@gmail.com> wrote:
> Thanks Jim!!! Where is "out of town"
>
> Sully
> 77 royale
> ------Original Message------
> From: Jim Kanomata
> Sender: gmclist-bounces@temp.gmcnet.org
> To: gmclist@temp.gmcnet.org
> ReplyTo: gmclist@temp.gmcnet.org
> Subject: Re: [GMCnet] bogie grease
> Sent: Dec 6, 2011 7:57 PM
>
> The 1 1/2 pins use 4 bushings per pin.
>
> On Tue, Dec 6, 2011 at 4:49 PM, sgltrac <sgltrac@gmail.com> wrote:
>>
>>
>> Yes on the Reamer. The Jim K kit only takes two bushings per bogie as opposed to the stock four. I asked and was told that they are wider....
>> --
>> Sully
>> 77 Royale basket case.
>> Future motorhome land speed record holder(bucket list)
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
>
>
> --
> Jim Kanomata
> Applied/GMC, Fremont,CA
> jimk@appliedairfilters.com
> http://www.appliedgmc.com
> 1-800-752-7502
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
>
> Sent from my Verizon Wireless BlackBerry
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Sully
77 Royale basket case.
Future motorhome land speed record holder(bucket list)
Seattle, Wa.
|
|
|
|
| Re: [GMCnet] bogie grease [message #152011 is a reply to message #152003] |
Wed, 07 December 2011 00:43 |
 |
ljdavick
Messages: 3548
Registered: March 2007
Location: Fremont, CA
Karma: -3
|
Senior Member |
|
|
For $1,000 you only need to score 40%
Larry Davick
Sent from my iPad
On Dec 6, 2011, at 9:10 PM, Jim Kanomata <jimkanomata@gmail.com> wrote:
> I'm in Stockton,CA attending the Generac class on generator training.
> I thought it would be a easy course, but it is tougher than I expected.
> They charged me $500 and are going to pound in that much knowledge.
> Being a 69 year old does not make it easy.
> Something basic as a OHM's law had me scratching my you know what.
> I need to get 80% on the test tomorrow. Wish me luck.
>
>
>
>
>
>
> On Tue, Dec 6, 2011 at 8:00 PM, <sgltrac@gmail.com> wrote:
>> Thanks Jim!!! Where is "out of town"
>>
>> Sully
>> 77 royale
>> ------Original Message------
>> From: Jim Kanomata
>> Sender: gmclist-bounces@temp.gmcnet.org
>> To: gmclist@temp.gmcnet.org
>> ReplyTo: gmclist@temp.gmcnet.org
>> Subject: Re: [GMCnet] bogie grease
>> Sent: Dec 6, 2011 7:57 PM
>>
>> The 1 1/2 pins use 4 bushings per pin.
>>
>> On Tue, Dec 6, 2011 at 4:49 PM, sgltrac <sgltrac@gmail.com> wrote:
>>>
>>>
>>> Yes on the Reamer. The Jim K kit only takes two bushings per bogie as opposed to the stock four. I asked and was told that they are wider....
>>> --
>>> Sully
>>> 77 Royale basket case.
>>> Future motorhome land speed record holder(bucket list)
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>
>>
>>
>> --
>> Jim Kanomata
>> Applied/GMC, Fremont,CA
>> jimk@appliedairfilters.com
>> http://www.appliedgmc.com
>> 1-800-752-7502
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>
>>
>> Sent from my Verizon Wireless BlackBerry
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
>
>
> --
> Jim Kanomata
> Applied/GMC, Fremont,CA
> jimk@appliedairfilters.com
> http://www.appliedgmc.com
> 1-800-752-7502
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Larry Davick
A Mystery Machine
1976(ish) Palm Beach
Fremont, Ca
Howell EFI + EBL + Electronic Dizzy
|
|
|
|
| Re: [GMCnet] bogie grease [message #152018 is a reply to message #152003] |
Wed, 07 December 2011 06:59 |
jhbridges
Messages: 8412
Registered: May 2011
Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
Good luck. Surely you will be giving seminars on the Care and Feeding of the Generac at rallys, will you not?
--johnny
3.6 Generac
5500 Yamaha
6000Onan
And soem bigger ones
________________________________
From: Jim Kanomata <jimkanomata@gmail.com>
To: gmclist@temp.gmcnet.org
Sent: Wednesday, December 7, 2011 12:10 AM
Subject: Re: [GMCnet] bogie grease
I'm in Stockton,CA attending the Generac class on generator training.
I thought it would be a easy course, but it is tougher than I expected.
They charged me $500 and are going to pound in that much knowledge.
Being a 69 year old does not make it easy.
Something basic as a OHM's law had me scratching my you know what.
I need to get 80% on the test tomorrow. Wish me luck.
On Tue, Dec 6, 2011 at 8:00 PM, <sgltrac@gmail.com> wrote:
> Thanks Jim!!! Where is "out of town"
>
> Sully
> 77 royale
> ------Original Message------
> From: Jim Kanomata
> Sender: gmclist-bounces@temp.gmcnet.org
> To: gmclist@temp.gmcnet.org
> ReplyTo: gmclist@temp.gmcnet.org
> Subject: Re: [GMCnet] bogie grease
> Sent: Dec 6, 2011 7:57 PM
>
> The 1 1/2 pins use 4 bushings per pin.
>
> On Tue, Dec 6, 2011 at 4:49 PM, sgltrac <sgltrac@gmail.com> wrote:
>>
>>
>> Yes on the Reamer. The Jim K kit only takes two bushings per bogie as opposed to the stock four. I asked and was told that they are wider....
>> --
>> Sully
>> 77 Royale basket case.
>> Future motorhome land speed record holder(bucket list)
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
>
>
> --
> Jim Kanomata
> Applied/GMC, Fremont,CA
> jimk@appliedairfilters.com
> http://www.appliedgmc.com
> 1-800-752-7502
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
>
> Sent from my Verizon Wireless BlackBerry
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|
|
Goto Forum:
Current Time: Wed Apr 02 05:12:26 CDT 2025
Total time taken to generate the page: 0.00952 seconds
|
GMCforum
Search
Help
Register
Login
Home
