Bill Shourt [message #184321] |
Thu, 13 September 2012 14:49 |
Bill Shourt
Messages: 33 Registered: January 2005 Location: Sherman Oaks ,Ca
Karma:
|
Member |
|
|
I have removed the retaining ring from the top of the PS box as per the manual. The next step is to remove the seal. Any suggestions on how to do this without damaging the shaft? Also the manual says there should be a dust shield over the seal which mine did not have and I could not find a part number in the parts interchange book. Thanks in advance for your invaluable help.
Bill and Michele Shourt
78 Kingsley, origional
|
|
|