GMCforum: GMCnet » Bill Shourt

Home » Public Forums » GMCnet » Bill Shourt (PS box top seal replacement)

Show: Today's Messages :: Polls :: Message Navigator

Bill Shourt [message #184320]

Thu, 13 September 2012 14:48

Bill Shourt

Messages: 33
Registered: January 2005
Location: Sherman Oaks ,Ca

Karma:

Member

I have removed the retaining ring from the top of the PS box as per the manual. The next step is to remove the seal. Any suggestions on how to do this without damaging the shaft? Also the manual says there should be a dust shield over the seal which mine did not have and I could not find a part number in the parts interchange book. Thanks in advance for your invaluable help.

Report message to a moderator

[Message index]

Bill Shourt

By: Bill Shourt on Thu, 13 September 2012 14:48

Previous Topic:	[GMCnet] GMCMI Fall Convention "Build A Clock" Has a Couple of Spots Still Open
Next Topic:	Bill Shourt

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Oct 03 03:34:17 CDT 2024

Total time taken to generate the page: 0.02209 seconds