GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMC Swap Meet » 1973 Front end parts available (Just completed Hubler upgrade)
1973 Front end parts available [message #184278] Thu, 13 September 2012 10:47 Go to next message
SeanKidd is currently offline  SeanKidd   United States
Messages: 747
Registered: June 2012
Location: Northern Neck Virginia
Karma: 4
Senior Member
Axles, knuckles, lower control arms (1973), hubs, rotors and calipers. Shipping from 07416 (Fluorescent Mineral Capital)
84k miles

Sean and Stephanie
73 Ex-CanyonLands 26' #317 "Oliver"
Hubler 1-Ton, Quad-Bags, Rear Disc, Reaction Arms, P.Huber TBs, 3.70:1 LSD Honda 6500 inverter gen.
Colonial Travelers

Report message to a moderator

Re: 1973 Front end parts available [message #184923 is a reply to message #184278] Tue, 18 September 2012 06:02 Go to previous messageGo to next message
SeanKidd is currently offline  SeanKidd   United States
Messages: 747
Registered: June 2012
Location: Northern Neck Virginia
Karma: 4
Senior Member
These parts will be going to the recycler this week if no one wants them.

Sean and Stephanie
73 Ex-CanyonLands 26' #317 "Oliver"
Hubler 1-Ton, Quad-Bags, Rear Disc, Reaction Arms, P.Huber TBs, 3.70:1 LSD Honda 6500 inverter gen.
Colonial Travelers

Report message to a moderator

Re: 1973 Front end parts available [message #184946 is a reply to message #184278] Tue, 18 September 2012 08:49 Go to previous messageGo to next message
Matt Colie is currently offline  Matt Colie   United States
Messages: 8547
Registered: March 2007
Location: S.E. Michigan
Karma: 7
Senior Member
It is a shame to scrap good hardware, but I do not have the resources to come and get all that stuff now. If you were coming to Amana, someone (like me) would take them home.

If you could let them sit a while longer, I might be able to conjure up a means to retrieve them. We will be ralling until the end of this month.

Matt

Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit

Report message to a moderator

Re: 1973 Front end parts available [message #184995 is a reply to message #184278] Tue, 18 September 2012 14:06 Go to previous messageGo to next message
bobby5832708 is currently offline  bobby5832708   United States
Messages: 237
Registered: November 2006
Location: Winter Springs FL
Karma: 3
Senior Member
I will take the axles and knuckles. I've got a friend not too far from you who can pick the parts up. I sent a PM with my contact info.

Bob Heller
2017 Winnebago 29VE
Winter Springs FL

Report message to a moderator

Re: 1973 Front end parts available [message #185010 is a reply to message #184946] Tue, 18 September 2012 15:53 Go to previous messageGo to next message
SeanKidd is currently offline  SeanKidd   United States
Messages: 747
Registered: June 2012
Location: Northern Neck Virginia
Karma: 4
Senior Member
Axles are claimed, still have calipers, knuckles, hubs/rotors...I'll hold them for now...I don't think the '73 lower control arms are desireable,I may chuck those...

Anyone travelling on I84 near the PA border? I'm only 20 miles or so south of there. No Amana for me this year, coach not quite seaworthy.

Sean and Stephanie
73 Ex-CanyonLands 26' #317 "Oliver"
Hubler 1-Ton, Quad-Bags, Rear Disc, Reaction Arms, P.Huber TBs, 3.70:1 LSD Honda 6500 inverter gen.
Colonial Travelers

Report message to a moderator

Re: 1973 Front end parts available [message #185037 is a reply to message #185010] Tue, 18 September 2012 20:14 Go to previous messageGo to next message
A Hamilto is currently offline  A Hamilto   United States
Messages: 4508
Registered: April 2011
Karma: 39
Senior Member
SeanKidd wrote on Tue, 18 September 2012 15:53

...I don't think the '73 lower control arms are desireable,I may chuck those...

I believe they are acceptable "cores" for the Hubler one-ton that Jim K sells, don't know about the MannyMade kit. Not acceptable as cores for the refurbished stock arms that Jim K sells.

Report message to a moderator

Re: 1973 Front end parts available [message #186194 is a reply to message #185037] Tue, 02 October 2012 09:49 Go to previous message
SeanKidd is currently offline  SeanKidd   United States
Messages: 747
Registered: June 2012
Location: Northern Neck Virginia
Karma: 4
Senior Member
Still have used calipers, free, just pay postage.

Sean and Stephanie
73 Ex-CanyonLands 26' #317 "Oliver"
Hubler 1-Ton, Quad-Bags, Rear Disc, Reaction Arms, P.Huber TBs, 3.70:1 LSD Honda 6500 inverter gen.
Colonial Travelers

Report message to a moderator

Previous Topic: Free Rear Mattress 52.5" x 78" x 6" Good Shape
Next Topic: Dinette and more 1976 Eleganza
Goto Forum:
  


Current Time: Wed Mar 26 09:07:21 CDT 2025

Total time taken to generate the page: 0.01244 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software