GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Jerry Work allignment kit ( Bringing to ( is there flat cement))
Jerry Work allignment kit [message #184174] Wed, 12 September 2012 18:32 Go to next message
JohnL455 is currently offline  JohnL455   United States
Messages: 4447
Registered: October 2006
Location: Woodstock, IL
Karma: 12
Senior Member
I hope to make it to Amana but being just out of hospital I can't say 100%. I will bring my new kit with and hope to have someone help do my coach and whoever else needs theirs done. I just can't shimmy on my belly right now with a big scar and don't have much strength, good news is all my parts are tight and the cams are at neutral position so we can dial in more caster and the set the toe, I have R12 gauges and a vacuum pump too. If anyone needs me to bring let me know. Hope to make it. John.

John Lebetski
Woodstock, IL
77 Eleganza II
Re: [GMCnet] Jerry Work allignment kit [message #184274 is a reply to message #184174] Thu, 13 September 2012 10:12 Go to previous message
jhbridges is currently offline  jhbridges   United States
Messages: 8412
Registered: May 2011
Location: Braselton ga
Karma: -74
Senior Member
Glad to hear you're Out!  Try to stay that way, most horsepistols are expensive and uncomfortable.
 
--johnny
'76 23' transmode norris
'76 palm beach


________________________________
From: John R. Lebetski <gransport@aol.com>
To: gmclist@temp.gmcnet.org
Sent: Wednesday, September 12, 2012 7:32 PM
Subject: [GMCnet] Jerry Work allignment kit



I hope to make it to Amana but being just out of hospital I can't say 100%. I will bring my new kit with and hope to have someone help do my coach and whoever else needs theirs done. I just can't shimmy on my belly right now with a big scar and don't have much strength,  good news is all my parts are tight and the cams are at neutral position so we can dial in more caster and the set the toe,  I have R12 gauges and a vacuum pump too. If anyone needs me to bring let me know. Hope to make it.  John.
--
John Lebetski
Chicago, IL
77 Eleganza II
Source America First
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons. Braselton, Ga. I forgive them all, save those who hurt the dogs. They must answer to me in hell
Previous Topic: Muffler temps
Next Topic: [GMCnet] GMCMI 2012 Fall Technical Sessions Schedule
Goto Forum:
  


Current Time: Thu Oct 03 15:25:28 CDT 2024

Total time taken to generate the page: 0.00855 seconds