GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMC Swap Meet » Parts from a 1974
Parts from a 1974 [message #183795] Sun, 09 September 2012 19:19 Go to next message
crash24 is currently offline  crash24   Canada
Messages: 79
Registered: February 2012
Location: Vancouver, B.C.
Karma: 0
Member


PART FOR SALE Price
OEM HUB, EACH $150.00
OEM HUB, KNUCKLE, BEARING ROTOR ASSMBLY
PASSENGER SIDE ONLY $350.00
OEM HUB, BEARING, ROTOR (REBUILDABLE KNUCKLE)
DRIVERS SIDE ONLY $250.00
2 NEW OEM UPPER “A” ARM BUSHINGS $20.00
2 AXLE ASSEMBLIES, REBUILT, NEW BOOTS $300.00
2 USED CALIPERS, HOSES, PADS (< 1000 MILES) $66.00
2 USED INNER CV JOINTS WITH BOOTS $100.00
2 ONE TON UPPER BALL JOINTS, NEW $75.00
2 AXLES (WORN CV JOINTS, STILL USEABLE) $150.00
1 USED FINAL DRIVE $100.00
I TRANSMISSION GOVERNOR WITH GEAR $120.00
2 REAR AXLE ASSEMBLIES COMPLETE (4 BOGIES),
4 SPINDLES, BRAKE DRUMS, ETC $1,000.00
MARINE ALL STAINLESS HOT WATER HEATER $250.00
4KW ONAN (RUNNING IN MY COACH) $500.00
1 Sure Power Multi Battery Isolator 120 Amp $35.00
1 120V TO 12V Intelli Power 60A DC CONVERTOR $150.00
Trans governor MODIFIED so you can change it without
removing headers. Exchange for good governor $60.00
misc; Ride height control valves, Air system control valves
OEM compressor, after market compressor, tank, gauges,
new air manifolds, valves, tubing, Onan switch,
3 used air bags with Aluminum Cones, Tail light lense
Many other parts available from wrecked coaches.

Carboneraser@gmail.com

[Updated on: Sun, 09 September 2012 19:19]

Report message to a moderator

Re: Parts from a 1974 [message #183804 is a reply to message #183795] Sun, 09 September 2012 21:45 Go to previous messageGo to next message
Matt Colie is currently offline  Matt Colie   United States
Messages: 8547
Registered: March 2007
Location: S.E. Michigan
Karma: 7
Senior Member
That's a nice clean and clear list, but shipping is a killer from Patagonia.
Or, do you have a better geographical like a country, state/province and county.
You could put that in a sig file and be done.

Matt


Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit
Re: Parts from a 1974 [message #183867 is a reply to message #183804] Mon, 10 September 2012 15:03 Go to previous messageGo to next message
crash24 is currently offline  crash24   Canada
Messages: 79
Registered: February 2012
Location: Vancouver, B.C.
Karma: 0
Member

I figured it out, finally. Parts can be shipped from the US to save on cost if you are not in a hurry?
Thanks Matt, I'm forever annoyed at this oversight. I've been trying to contact a local GMC owner for over one month.
Matt Colie wrote on Sun, 09 September 2012 19:45

That's a nice clean and clear list, but shipping is a killer from Patagonia.
Or, do you have a better geographical like a country, state/province and county.
You could put that in a sig file and be done.

Matt

Re: Parts from a 1974 [message #184280 is a reply to message #183795] Thu, 13 September 2012 10:54 Go to previous message
homer is currently offline  homer   Canada
Messages: 73
Registered: April 2011
Location: arizona/ BC canada
Karma: 0
Member
looking for window screens, homer 604-239-4132

homer
Previous Topic: SOLD - '73 Canyon Lands in AZ (across the river from Henderson NV)
Next Topic: selling the 78 Royale
Goto Forum:
  


Current Time: Fri Oct 04 02:25:29 CDT 2024

Total time taken to generate the page: 0.01806 seconds