ONAN wires update [message #183715] |
Sun, 09 September 2012 02:04 |
JohnL455
Messages: 4447 Registered: October 2006 Location: Woodstock, IL
Karma: 12
|
Senior Member |
|
|
I pulled the OEM wires from my 77 6k. The rubber is hard crisp and boots cracked through. Amazing the things run as well as they do with carbon particles on a bit of string and free air open cracked boots. Corroded terminals too not bright metal. These will be going to Indiana to my USA vendor to be copied for fit this week. Hope to have 2012 tech wires with stainless terminals and silicone boots sooner than later. Fingers crossed with excitement.
John Lebetski
Woodstock, IL
77 Eleganza II
|
|
|
|
Re: [GMCnet] ONAN wires update [message #183725 is a reply to message #183724] |
Sun, 09 September 2012 07:04 |
Ken Burton
Messages: 10030 Registered: January 2004 Location: Hebron, Indiana
Karma: 10
|
Senior Member |
|
|
Mr ERFisher wrote on Sun, 09 September 2012 04:35 | On Sun, Sep 9, 2012 at 12:04 AM, John R. Lebetski <gransport@aol.com> wrote:
>
>
> I pulled the OEM wires from my 77 6k.
what wires are these ?
control board
110 power
?
i do not understand
gene
> The rubber is hard crisp and boots cracked through. Amazing the things
> run as well as they do with carbon particles on a bit of string and free
> air open cracked boots. Corroded terminals too not bright metal. These
> will be going to Indiana to my USA vendor to be copied for fit this week.
> Hope to have 2012 tech wires with stainless terminals and silicone boots
> sooner than later. Fingers crossed with excitement.
> --
> John Lebetski
> Chicago, IL
> 77 Eleganza II
> Source America First
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
He previously posted while he was in the hospital that he was going to have some silicon spark plug wires made for the Onan.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|
Re: ONAN wires update [message #183727 is a reply to message #183715] |
Sun, 09 September 2012 07:21 |
JohnL455
Messages: 4447 Registered: October 2006 Location: Woodstock, IL
Karma: 12
|
Senior Member |
|
|
Sorry. Yes the ignition or plug wire set of 2 . If you remember in 60s when you did a "tune up" wires were to be replaced every 25k as the carbon conductor wires had a sacrificial service life. The old tech wires on most of our Onans timed out many years ago. In today's OBDII world the new tech wires have to meet emmisions at 100k miles and beyond.
John Lebetski
Woodstock, IL
77 Eleganza II
|
|
|