GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMCnet » [GMCnet] Steel Brake Line Kit?
[GMCnet] Steel Brake Line Kit? [message #182286] Wed, 29 August 2012 16:27 Go to next message
Marsh Wilkes is currently offline  Marsh Wilkes   United States
Messages: 155
Registered: January 2004
Karma: -3
Senior Member
I know Jim K has a stainless steel brake line kit for about $500.
Does anyone have a less expensive steel line kit?

Marsh (who rarely post anymore) Wilkes
Perry Fl
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] Steel Brake Line Kit? [message #182290 is a reply to message #182286] Wed, 29 August 2012 16:47 Go to previous messageGo to next message
ljdavick is currently offline  ljdavick   United States
Messages: 3548
Registered: March 2007
Location: Fremont, CA
Karma: -3
Senior Member
Marsh,

I had Tom Hampton install Stainless brake lines at his shop in Ohio. If I were to do it myself I'd use PolyArmour for the brakes too.

<http://agscompany.com/automotive/brake-fuel-transmission-lines/poly-armour>


Larry Davick
Fremont, California
A Mystery Machine
'76 (ish) Palm Beach

----- Original Message -----
From: "Marsh Wilkes" <gmc455@comcast.net>
To: gmclist@temp.gmcnet.org
Sent: Wednesday, August 29, 2012 2:27:46 PM
Subject: [GMCnet] Steel Brake Line Kit?

I know Jim K has a stainless steel brake line kit for about $500.
Does anyone have a less expensive steel line kit?

Marsh (who rarely post anymore) Wilkes
Perry Fl
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Larry Davick
A Mystery Machine
1976(ish) Palm Beach
Fremont, Ca
Howell EFI + EBL + Electronic Dizzy

Report message to a moderator

Re: [GMCnet] Steel Brake Line Kit? [message #182293 is a reply to message #182290] Wed, 29 August 2012 17:09 Go to previous messageGo to next message
Harry is currently offline  Harry   Canada
Messages: 1888
Registered: October 2007
Location: Victoria, BC CANADA
Karma: 3
Senior Member
Brake lines are not hard to do except stainless is harder to flare. Take an old line off and copy the bends.

Report message to a moderator

Re: [GMCnet] Steel Brake Line Kit? [message #182314 is a reply to message #182286] Wed, 29 August 2012 19:34 Go to previous messageGo to next message
USAussie is currently offline  USAussie   United States
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma: 6
Senior Member
Marsh,

Yep, Classic Tube makes a set.

HOWEVER, you better be good at fabricating stainless steel tubing cause they don't fit very well (at least mine didn't)!

Regards,
Rob M.

-----Original Message-----
From: Marsh Wilkes

I know Jim K has a stainless steel brake line kit for about $500.
Does anyone have a less expensive steel line kit?

Marsh

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Regards, Rob M. (USAussie) The Pedantic Mechanic Sydney, Australia '75 Avion - AUS - The Blue Streak TZE365V100428 '75 Avion - USA - Double Trouble TZE365V100426

Report message to a moderator

Re: [GMCnet] Steel Brake Line Kit? [message #182352 is a reply to message #182314] Thu, 30 August 2012 07:29 Go to previous message
stradwill is currently offline  stradwill   United States
Messages: 6
Registered: August 2012
Karma: 0
Junior Member
Doyou have a line on air bags?
---- Rob Mueller <robmueller@iinet.net.au> wrote:
> Marsh,
>
> Yep, Classic Tube makes a set.
>
> HOWEVER, you better be good at fabricating stainless steel tubing cause they don't fit very well (at least mine didn't)!
>
> Regards,
> Rob M.
>
> -----Original Message-----
> From: Marsh Wilkes
>
> I know Jim K has a stainless steel brake line kit for about $500.
> Does anyone have a less expensive steel line kit?
>
> Marsh
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Previous Topic: Screws For Davo Bed?
Next Topic: Aluminum water Pump
Goto Forum:
  


Current Time: Tue Nov 05 12:41:46 CST 2024

Total time taken to generate the page: 0.01002 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software