[GMCnet] Transmission pan gasket [message #181421] |
Thu, 23 August 2012 10:57 |
emerystora
Messages: 4442 Registered: January 2004
Karma:
|
Senior Member |
|
|
After putting in my rebuilt transmission I discovered that I had a large leak. The gasket from the rebuild appears to be a cork composite gasket. I kept re-tourqing it. The bolts would move about 1/8 to 1/4 turn each time. The leak slowed but it would not seal on the rear end of the pan. It is a Regusa pan so it has a flat surface.
I used to use a NAPA rubberized gasket. I called around and found one in stock at NAPA. It is their part 14525. I know this one will stop the leak. I will put it in later today.
This gasket is only $3.33 at one NAPA and $3.85 at the place that has it in stock.
Emery Stora
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|