| Re: [GMCnet] Clearance Light Wires [message #180825] |
Sun, 19 August 2012 15:27  |
Gerald Wheeler
Messages: 152
Registered: February 2004
Karma:
|
Senior Member |
|
|
So, is there a chance I can fish out the other side of the ground wire
through the 1/2 inch hole in the roof?
I've done it 3 times on 3 different coaches. Just use a fairly stiff wire
like a coat hanger.
JR Wheeler NC/OR
> [Original Message]
> From: SThornbg <SThornbg@aol.com>
> To: <gmclist@temp.gmcnet.org>
> Date: 8/19/2012 12:21:46 PM
> Subject: [GMCnet] Clearance Light Wires
>
>
>
> In the process of changing clearance lights to LED sealed units. Back of
the coach went fairly smooth except for one loose rivnut. Rather than
remove and replace I stuck it down with JBWeld. Got five bright red
lights......
>
> When I removed the non-functioning front passenger side light, I found
the ground wire attached to the light, but detatched from the inside wire
loom - I got a short red pigtail with a male side connector attached.
>
> So, is there a chance I can fish out the other side of the ground wire
through the 1/2 inch hole in the roof?
>
> Is there a good way to fish a new wire across to the next light and
piggyback a ground?
>
> Am I at the ugly point of having to drop headliner to reconnect that
ground?
>
> Any guidance would be greatly appreciated.
>
> Steve Thornburg
> South Bend, IN
> 77 exPB 455 "Tinker Toy"
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.2197 / Virus Database: 2437/5209 - Release Date: 08/19/12
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
