GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » GMC fuel gauge wiring (GMC FUEL gauge wiring question)
icon5.gif  GMC fuel gauge wiring [message #175887] Sat, 07 July 2012 13:11 Go to previous message
Scooby Doo is currently offline  Scooby Doo   United States
Messages: 92
Registered: May 2012
Location: Miami, Florida
Karma:
Member
Hello All,

I am currently attempting to put some gauges into my dashboard.
I have decided to put in a mechanical oil pressure and water temperature, and also a fuel gauge to replace the stock cluster.

I have purchased a 0 to 90 ohm fuel gauge and I am very confused about how to connect the wiring to it. The GMC gauge cluster has a plug in wire harness (lots of wires!) to operate all three gauges.
On the fuel gauge I purchased, I have three terminals. One for ground, one for ignition switch, and one for the sending unit.
Will I be dealing with more than one sending wire ? (since I have two gas tanks)
Will I be putting the two wires together if so ?
Or, will I need to have two separate gauges and have to buy a second fuel gauge ?
I am hoping to just have one fuel gauge as I did on my stock GMC set up.
I am also attempting to put up a link to a photo of the stock wiring harness to the GMC gauge cluster.
photo link : GMC gauge cluster

I read the forum every day and have been learning so much from all the random posts. I am learning more & more each day about our GMC motorhome. The GMC.net is full of information.
I look forward to hearing back from some of you tech guys.

Thank you in advance.

Glenn Gardner


Glenn & Elaine Gardner... Miami, Florida... 1976 Royale (transmode) TZE366V100733
 
Read Message icon5.gif
Read Message
Read Message
Read Message
Read Message icon14.gif
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Propane leak detector
Next Topic: Ebay picture looks like my backyard...
Goto Forum:
  


Current Time: Mon Oct 07 02:23:58 CDT 2024

Total time taken to generate the page: 0.00592 seconds