GMCforum: GMCnet » Rad bracket, is it welded in place?

Home » Public Forums » GMCnet » Rad bracket, is it welded in place?

Show: Today's Messages :: Polls :: Message Navigator

Rad bracket, is it welded in place? [message #173521]

Sat, 16 June 2012 12:32

RF_Burns

Messages: 2277
Registered: June 2008
Location: S. Ontario, Canada

Karma:

Senior Member

See this photo for the bracket I am talking about:
http://www.gmcmhphotos.com/photos/member-galleries/p44529-rad-bracket.html

I noticed this bottom rad cushion bracket is not placed properly and its going to wear a hold in my rad. I've loosened the top retaining bracket off, but while the bracket will flex a bit, I can't get it to move over into position.

Can anyone confirm if this bracket is welded in place? or do I need to exert more force to move it?

thanks

Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that

Report message to a moderator

[Message index]

		Rad bracket, is it welded in place? By: RF_Burns on Sat, 16 June 2012 12:32
		Re: [GMCnet] Rad bracket, is it welded in place? By: Ken Henderson on Sat, 16 June 2012 13:28
		Re: [GMCnet] Rad bracket, is it welded in place? By: USAussie on Sat, 16 June 2012 18:02
		Re: [GMCnet] Rad bracket, is it welded in place? By: Jp Benson on Mon, 18 June 2012 08:17
		Re: Rad bracket, is it welded in place? By: JohnL455 on Sat, 16 June 2012 13:32
		Re: Rad bracket, is it welded in place? By: RF_Burns on Sat, 16 June 2012 13:46
		Re: Rad bracket, is it welded in place? By: RF_Burns on Mon, 18 June 2012 08:57
		Re: [GMCnet] Rad bracket, is it welded in place? By: USAussie on Mon, 18 June 2012 09:25
		Re: [GMCnet] Rad bracket, is it welded in place? By: Jp Benson on Tue, 19 June 2012 08:41
		Re: [GMCnet] Rad bracket, is it welded in place? By: USAussie on Tue, 19 June 2012 09:24
		Re: Rad bracket, is it welded in place? By: RF_Burns on Mon, 18 June 2012 12:14
		Re: [GMCnet] Rad bracket, is it welded in place? By: USAussie on Mon, 18 June 2012 22:40

Previous Topic:	crosswind issues
Next Topic:	[GMCnet] HF Multimeter

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Feb 05 18:56:30 CST 2025

Total time taken to generate the page: 0.08886 seconds