GMCforum: GMCnet » Air Line Connectors to ElectroLevel I solenoids

Home » Public Forums » GMCnet » Air Line Connectors to ElectroLevel I solenoids

Show: Today's Messages :: Polls :: Message Navigator

Air Line Connectors to ElectroLevel I solenoids [message #173089]

Tue, 12 June 2012 12:36

larry.whisler

Messages: 356
Registered: August 2005

Karma: 8

Senior Member

I finally am getting around to installing Electro Level I new air lines that I bought from JimK a while back.

What's replacement procedure for hooking up the air lines to the solenoids/air tank?

These fittings are a bit different from the compression fittings.

larry whisler
76 glenbrook

Report message to a moderator

Re: Air Line Connectors to ElectroLevel I solenoids [message #173180 is a reply to message #173089]

Wed, 13 June 2012 10:03

JShot

Messages: 485
Registered: October 2006
Location: NW Ohio

Karma: 0

Senior Member

larry.whisler wrote on Tue, 12 June 2012 13:36

Larry, did you get it figured out?

John Shotwell
Ridgeville Corners, OH
78 Royale Center Kitchen

Report message to a moderator

Re: Air Line Connectors to ElectroLevel I solenoids [message #173249 is a reply to message #173180]

Wed, 13 June 2012 21:52

larry.whisler

Messages: 356
Registered: August 2005

Karma: 8

Senior Member

Shot,

Yes, bought some 1/4" compression to 1/8" NPT adapters to replace the existing connectors.

I did not look closely at what I had. Picked up the parts today and will put back together tomorrow.

thanks for asking

larry

[Updated on: Thu, 14 June 2012 07:53]

Report message to a moderator

Previous Topic:	[GMCnet] Honda seats
Next Topic:	[GMCnet] Dog House Insulation

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Jan 29 00:05:08 CST 2025

Total time taken to generate the page: 0.01137 seconds