GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Heater core, which way does the coolant flow
Heater core, which way does the coolant flow [message #172798] Sun, 10 June 2012 12:37 Go to previous message
RF_Burns is currently offline  RF_Burns   Canada
Messages: 2277
Registered: June 2008
Location: S. Ontario, Canada
Karma:
Senior Member
My thermostat is sticking open, so I'm installing a new one today.

While I'm at it, I want to install a shutoff valve on the heater core. The valve I has shows a coolant flow arrow for direction on it, but I don't know which hose is coming and going.

One hose is larger (3/4" I believe) and goes to the waterpump. The second hose is smaller (5/8") and goes to the T connection at the back passenger side of the intake.

Anyone know which is which?

I'm thinking the larger is the hot going to the heater just looking at the construction of the water pump and my farmboy knowledge of centrifugal pump operation.

Thanks


Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: New Intake suggestions
Next Topic: Drawer latches
Goto Forum:
  


Current Time: Thu Jan 23 12:28:16 CST 2025

Total time taken to generate the page: 0.01162 seconds