GMCforum: GMCnet » wrench size for airline connector to airbag ??

Home » Public Forums » GMCnet » wrench size for airline connector to airbag ??

Show: Today's Messages :: Polls :: Message Navigator

wrench size for airline connector to airbag ?? [message #170847]

Fri, 25 May 2012 16:31

glacierfl

Messages: 444
Registered: June 2011

Karma: 0

Senior Member

Hello,
I have looked for the wrench size needed to get the connector that feeds into the air bag off, but no luck. Please can anyone tell me the size i need. None of my wrenches fit the nut.... I assume that it is an imperial size needed and not metric.

cheers and beers

Steve & Debbie Monticello, FL 77 Palm Beach :- Aurora EX G4WDT

Report message to a moderator

Re: [GMCnet] wrench size for airline connector to airbag ?? [message #170853 is a reply to message #170847]

Fri, 25 May 2012 17:48

george beck

Messages: 66
Registered: December 2008

Karma: 0

Member

That should be 1-1/16

________________________________
From: steve & debbie <zzdebz@yahoo.com>
To: gmclist@temp.gmcnet.org
Sent: Friday, May 25, 2012 5:31 PM
Subject: [GMCnet] wrench size for airline connector to airbag ??

Hello,
I have looked for the wrench size needed to get the connector that feeds into the air bag off, but no luck. Please can anyone tell me the size i need. None of my wrenches fit the nut.... I assume that it is an imperial size needed and not metric.

cheers and beers
--
Steve & Debbie
Monticello, FL
77 Palm Beach :- Aurora
EX G4WDT
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] wrench size for airline connector to airbag ?? [message #170858 is a reply to message #170847]

Fri, 25 May 2012 20:34

sgltrac

Messages: 2797
Registered: April 2011

Karma: 1

Senior Member

If it is metal it is likely a 9/16. If it is the original plastic then I would use a pair of standard slip pliers very gingerly as it appears to be designed to hand tighten. The stock plastic nut on the air line only keeps the hose from backing off of the fitting as an o ring on the hose seals ( I use seals loosely ;) ) the connection. The adapter between the hose and the fill port of the bag should be 9/16

Sully
77 royale

Sent from my iPhone

On May 25, 2012, at 2:31 PM, steve & debbie <zzdebz@yahoo.com> wrote:

>
>
> Hello,
> I have looked for the wrench size needed to get the connector that feeds into the air bag off, but no luck. Please can anyone tell me the size i need. None of my wrenches fit the nut.... I assume that it is an imperial size needed and not metric.
>
> cheers and beers
> --
> Steve & Debbie
> Monticello, FL
> 77 Palm Beach :- Aurora
> EX G4WDT
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Sully 77 Royale basket case. Future motorhome land speed record holder(bucket list) Seattle, Wa.

Report message to a moderator

Re: wrench size for airline connector to airbag ?? [message #170868 is a reply to message #170847]

Fri, 25 May 2012 22:20

Ken Burton

Messages: 10030
Registered: January 2004
Location: Hebron, Indiana

Karma: 10

Senior Member

I'm not sure which nut you are trying to loosen but nothing on the coach is metric.

Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana

Report message to a moderator

Previous Topic:	[GMCnet] (no subject)
Next Topic:	[GMCnet] Ragusa Website Back Up!

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Nov 18 11:54:45 CST 2024

Total time taken to generate the page: 0.01037 seconds