GMCforum: GMCnet » Front end geometry

Home » Public Forums » GMCnet » Front end geometry

Show: Today's Messages :: Polls :: Message Navigator

Front end geometry [message #170806]

Fri, 25 May 2012 09:46

Surbo

Messages: 213
Registered: February 2004

Karma:

Senior Member

Howdy;

Here is a site where you can move the contact points around for the front end and see live what happens.

http://www.racingaspirations.com/?p=286

Most front end geometry sites are geared for racing, nevertheless, there is some intersting software around that has a lot of inputs that can be put in to get some results. Example;

http://www.susprog.com/tutorial/tutorial03/HerbAdams.htm

Bob Drewes in SESD

Report message to a moderator

[Message index]

		Front end geometry By: Surbo on Fri, 25 May 2012 09:46
		Re: [GMCnet] Front end geometry By: Kosier on Fri, 25 May 2012 13:11
		Re: Front end geometry By: bwevers on Fri, 25 May 2012 13:40

Previous Topic:	[GMCnet] This Engine might work in our GMC'S
Next Topic:	[GMCnet] This Engine might work in our GMC'S

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Oct 02 13:25:19 CDT 2024

Total time taken to generate the page: 0.00678 seconds