[GMCnet] True track vs Straight trak [message #169771] |
Tue, 15 May 2012 14:54 |
Thomas Pryor
Messages: 143 Registered: January 2011
Karma:
|
Senior Member |
|
|
The rest of the story on Bearings.
If you have a Zerk fitting on your bearing, *it is not sealed*. It has a
trash guard that appears to be a seal but is not. If you grease a sealed
bearing, you will blow out the seals and allow for water intrusion. Just
like the caution of adding a zerk fitting to front wheel bearings and
injecting too much grease. The Moral of the story is if you have a Zerk
fitting, keep feeding it grease to displace the moisture and salt.
The final comment is if you retrofit with a Straight Trak, and Delrin
slides they have been engineered to take the environmental abuse with no
Maintenance.http://www.appliedgmc.com/prod.itml/icOid/1214
--
Regards,
Tom Pryor
4188 Limerick Dr
Lake Wales, Fl 33859
Cell 248 470 9186
Living on a waterfront is not a matter of life or death. Its more
important than that.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|