Re: [GMCnet] Trying to figure out things! [message #169296 is a reply to message #169291] |
Fri, 11 May 2012 18:36 ![Go to previous message Go to previous message](/GMCforum/theme/default/images/up.png) ![Go to next message Go to next message](/GMCforum/theme/default/images/down.png) |
Bruce Hart
![United States United States](/GMCforum/images/flags/us.png) Messages: 1501 Registered: October 2011 Location: La Grange, Wyoming
Karma: 5
|
Senior Member |
|
|
The install is very easy. I cut off the wire leads from the buzz box, wire
to fuses went to positive connector on the converter, and second wire from
buzz box went to negative connector on converter. Used a #6 size wire to
ground converter casing to breaker panel. Plugged in power cord to 120
outlet that the buzz box was connected to and that was that.
On Fri, May 11, 2012 at 4:49 PM, john stehle <jodist@aol.com> wrote:
>
>
> How did your install go. I am thinking this is something I need after
> reading this thread. I didn't know the buss box should be replaced if still
> working. Any tips would be appriciated.
> JOHN STEHLE
> 78 ROYALE
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Bruce Hart
1976 Palm Beach
Milliken, Co
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Bruce Hart
1976 Palm Beach
1977 28' Kingsley
La Grange, Wyoming
|
|
|
|
|