GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.
Home » Public Forums » GMC Swap Meet » '73 switch plate
'73 switch plate [message #169050] Wed, 09 May 2012 12:49 Go to next message
Luvn737s is currently offline  Luvn737s   United States
Messages: 1106
Registered: June 2007
Karma: 2
Senior Member
I need a new switchplate for the 3 switches right by the entrance door. Anyone got a spare?

Randy
1973 26' Painted Desert
Ahwatukee (Phoenix) AZ

Report message to a moderator

Re: '73 switch plate [message #169071 is a reply to message #169050] Wed, 09 May 2012 17:24 Go to previous messageGo to next message
Matt Colie is currently offline  Matt Colie   United States
Messages: 8547
Registered: March 2007
Location: S.E. Michigan
Karma: 7
Senior Member
Luvn737s wrote on Wed, 09 May 2012 13:49

I need a new switchplate for the 3 switches right by the entrance door. Anyone got a spare?

Randy,

That is non-standard Despard switch plate, or at least I could not find one that was a match. If you go to a real electrical supply, they might have one. Not all manufacturers make all the possible products. I repaired mine with epoxy and fiber glass (like just about like many other things I repair).

I did buy a four switch version from Paul Smith at Shawnee and I believe he had another. Now I have forgotten what I wanted the fourth switch for....

Paul is in Traverse City MI and is in the GMCMI roster.

Matt

Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit

Report message to a moderator

Re: '73 switch plate [message #169164 is a reply to message #169050] Thu, 10 May 2012 16:44 Go to previous messageGo to next message
Luvn737s is currently offline  Luvn737s   United States
Messages: 1106
Registered: June 2007
Karma: 2
Senior Member
Mine's been epoxied a couple of times, but the plastic is brittle.

Randy
1973 26' Painted Desert
Ahwatukee (Phoenix) AZ

Report message to a moderator

Re: '73 switch plate [message #169473 is a reply to message #169164] Sun, 13 May 2012 21:16 Go to previous messageGo to next message
Bruce Hart is currently offline  Bruce Hart   United States
Messages: 1501
Registered: October 2011
Location: La Grange, Wyoming
Karma: 5
Senior Member
I have one in a parts coach, I haven't taken it out yet but it looks to be in one piece.

Bruce Hart 1976 Palm Beach 1977 28' Kingsley La Grange, Wyoming

Report message to a moderator

Re: '73 switch plate [message #170778 is a reply to message #169050] Thu, 24 May 2012 21:43 Go to previous message
glacierfl   United States
Messages: 444
Registered: June 2011
Karma: 0
Senior Member
hello,
if you cannot get one, have one made out of acrylic should not cost much....

cheers and beers

Steve & Debbie Monticello, FL 77 Palm Beach :- Aurora EX G4WDT

Report message to a moderator

Previous Topic: NOS Manny Tranny
Next Topic: Parting out a '73
Goto Forum:
  


Current Time: Sat Nov 16 23:30:00 CST 2024

Total time taken to generate the page: 0.01404 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.1.
Copyright ©2001-2021 FUDforum Bulletin Board Software