GMCforum: GMCnet » [GMCnet] motor and transmission removal

Home » Public Forums » GMCnet » [GMCnet] motor and transmission removal

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] motor and transmission removal [message #168973 is a reply to message #168943]

Tue, 08 May 2012 19:39

Ken Henderson

Messages: 8726
Registered: March 2004
Location: Americus, GA

Karma:

Senior Member

Les,

When I first installed the Cad 500, the fan would touch the shroud during
hard acceleration. I had to reposition the shroud slightly to provide
slightly more space on one side. I don't remember how much clearance that
was. I can check when I re-install the engine. I never had that problem
with the 455, which used the SAME motor mount.

Ken H.

On Tue, May 8, 2012 at 4:13 PM, Les Burt wrote:

> Just wondering how the fan blade clearance on the fiberglass shroud
> compares to the original horse collar unit?
>
> Any chance of the fan rubbing if an engine mount was bad?
>
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach

Report message to a moderator

[Message index]

		[GMCnet] motor and transmission removal By: Cameron Hong on Wed, 28 December 2011 15:51
		Re: [GMCnet] motor and transmission removal By: cameron on Wed, 28 December 2011 17:05
		Re: [GMCnet] motor and transmission removal By: hnielsen2 on Wed, 28 December 2011 17:28
		Re: [GMCnet] motor and transmission removal By: Bob de Kruyff on Wed, 28 December 2011 18:30
		Re: [GMCnet] motor and transmission removal By: ljdavick on Wed, 28 December 2011 19:04
		Re: [GMCnet] motor and transmission removal By: hnielsen2 on Wed, 28 December 2011 20:04
		Re: [GMCnet] motor and transmission removal By: hnielsen2 on Wed, 28 December 2011 17:15
		Re: [GMCnet] motor and transmission removal By: cameron on Wed, 28 December 2011 17:27
		Re: [GMCnet] motor and transmission removal By: hnielsen2 on Wed, 28 December 2011 17:31
		Re: [GMCnet] motor and transmission removal By: jimk on Fri, 30 December 2011 22:29
		Re: [GMCnet] motor and transmission removal By: hnielsen2 on Fri, 30 December 2011 23:18
		Re: [GMCnet] motor and transmission removal By: g.winger on Wed, 28 December 2011 19:04
		Re: [GMCnet] motor and transmission removal By: cameron on Fri, 30 December 2011 16:43
		Re: [GMCnet] motor and transmission removal By: Ken Burton on Sat, 31 December 2011 01:54
		Re: [GMCnet] motor and transmission removal By: Mr ERFisher on Sat, 31 December 2011 08:45
		Re: [GMCnet] motor and transmission removal By: hnielsen2 on Sat, 31 December 2011 09:45
		Re: [GMCnet] motor and transmission removal By: jimk on Sat, 31 December 2011 12:00
		Re: [GMCnet] motor and transmission removal By: cameron on Tue, 08 May 2012 09:57
		Re: [GMCnet] motor and transmission removal By: Ken Henderson on Tue, 08 May 2012 11:28
		Re: [GMCnet] motor and transmission removal By: GMC_LES on Tue, 08 May 2012 15:13
		Re: [GMCnet] motor and transmission removal By: Ken Henderson on Tue, 08 May 2012 19:39
		Re: [GMCnet] motor and transmission removal By: mike miller on Tue, 08 May 2012 11:34
		Re: [GMCnet] motor and transmission removal By: Ken Henderson on Tue, 08 May 2012 11:51
		Re: [GMCnet] motor and transmission removal By: Jp Benson on Tue, 08 May 2012 14:33
		Re: [GMCnet] motor and transmission removal By: Ken Henderson on Tue, 08 May 2012 19:34
		Re: [GMCnet] motor and transmission removal By: midlf on Thu, 10 May 2012 19:15
		Re: [GMCnet] motor and transmission removal By: mike miller on Thu, 10 May 2012 19:48
		Re: [GMCnet] motor and transmission removal By: Ken Burton on Fri, 11 May 2012 15:38
		Re: [GMCnet] motor and transmission removal By: Ken Henderson on Wed, 28 December 2011 19:12
		Re: [GMCnet] motor and transmission removal By: KB on Wed, 28 December 2011 20:05
		Re: [GMCnet] motor and transmission removal By: Bob de Kruyff on Wed, 28 December 2011 20:18
		Re: [GMCnet] motor and transmission removal By: USAussie on Wed, 28 December 2011 20:35
		Re: [GMCnet] motor and transmission removal By: Dolph Santorine on Wed, 28 December 2011 21:49
		Re: [GMCnet] motor and transmission removal By: jhbridges on Thu, 29 December 2011 12:56
		Re: [GMCnet] motor and transmission removal By: USAussie on Thu, 29 December 2011 16:18
		Re: [GMCnet] motor and transmission removal By: jhbridges on Thu, 29 December 2011 16:52
		Re: [GMCnet] motor and transmission removal By: USAussie on Thu, 29 December 2011 17:09
		Re: [GMCnet] motor and transmission removal By: cameron on Fri, 30 December 2011 16:47
		Re: [GMCnet] motor and transmission removal By: Larry on Wed, 28 December 2011 22:23
		Re: [GMCnet] motor and transmission removal By: Larry on Wed, 28 December 2011 22:26
		Re: [GMCnet] motor and transmission removal By: Mr ERFisher on Thu, 29 December 2011 05:57
		Re: [GMCnet] motor and transmission removal By: Bruce Hart on Thu, 29 December 2011 14:46
		Re: [GMCnet] motor and transmission removal By: Frank Condos on Thu, 29 December 2011 18:00
		Re: [GMCnet] motor and transmission removal By: cameron on Fri, 30 December 2011 17:06
		Re: [GMCnet] motor and transmission removal By: USAussie on Fri, 30 December 2011 18:10
		Re: [GMCnet] motor and transmission removal By: stkhlm on Thu, 29 December 2011 19:00
		Re: [GMCnet] motor and transmission removal By: Bruce Hart on Thu, 29 December 2011 23:03
		Re: [GMCnet] motor and transmission removal By: stkhlm on Fri, 30 December 2011 19:29
		Re: [GMCnet] motor and transmission removal By: cameron on Mon, 07 May 2012 18:08
		Re: [GMCnet] motor and transmission removal By: Ken Henderson on Mon, 07 May 2012 18:16
		Re: [GMCnet] motor and transmission removal By: PettyVTX on Thu, 10 May 2012 19:18
		Re: [GMCnet] motor and transmission removal By: Ken Henderson on Thu, 10 May 2012 19:32
		Re: [GMCnet] motor and transmission removal By: jhbridges on Fri, 11 May 2012 06:57

Previous Topic:	Windshield installer on east coast
Next Topic:	Sliding window weatherstrip replacement

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Nov 04 15:13:24 CST 2024

Total time taken to generate the page: 0.01039 seconds