Dinette table mounting [message #166456] |
Sun, 15 April 2012 22:04 |
Keith V
Messages: 2337 Registered: March 2008 Location: Mounds View,MN
Karma: 0
|
Senior Member |
|
|
I have a new dinette table ready to go into my coach, now I just need to figure out what to mount it to.
I got some nice brackets from the local rv store.
And looking through the photo gallery it looks like there is an aluminum reinforcement on the wall for the dinette?
Does anyone have measurements as to where it is?
I'll be mounting it on the passenger side.
Maybe my stud finder will work...
Keith Vasilakes
Mounds View. MN
75 ex Royale GMC
ask me about MicroLevel
Cell, 763-732-3419
My427v8@hotmail.com
|
|
|
|
|
Re: Dinette table mounting [message #166462 is a reply to message #166456] |
Sun, 15 April 2012 22:33 |
Carl S.
Messages: 4186 Registered: January 2009 Location: Tucson, AZ.
Karma: 13
|
Senior Member |
|
|
Keith V wrote on Sun, 15 April 2012 20:04 | I have a new dinette table ready to go into my coach, now I just need to figure out what to mount it to.
I got some nice brackets from the local rv store.
And looking through the photo gallery it looks like there is an aluminum reinforcement on the wall for the dinette?
Does anyone have measurements as to where it is?
I'll be mounting it on the passenger side.
Maybe my stud finder will work...
|
Keith,
I don't know if this helps, but my table top is 28-3/4 inches above the floor. I can post a picture if you might find that helpful too. The bracket on mine is mounted to a piece of one by material that is attached to the wall.
Carl Stouffer
'75 ex Palm Beach
Tucson, AZ.
Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles, Solar battery charging. GMCSJ and GMCMI member
|
|
|