| [GMCnet] bearing failure [message #166139] |
Thu, 12 April 2012 13:46 |
Thomas Pryor
Messages: 143
Registered: January 2011
Karma: 1
|
Senior Member |
|
|
Disassemble and forward an image of the inner raceway and the rollers.
I'm
wandering if the race is fatigue-spalled. If the bearing was over heated,
the inner-raceway usually fails first. Next thing to determine is what
caused the overheating condition? Lack of grease, improper fit up, or
debris in the bearing. I worked as a Quality Manager for NSK Bearing Co
in
a previous life............Since Retarded! I can ask the right questions
but don't necessarily have all the answers.
--
Regards,
Tom Pryor
4188 Limerick Dr
Lake Wales, Fl 33859
Cell 248 470 9186
Living on a waterfront is not a matter of life or death. Its more
important than that.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
