GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » KenH - engine room insulation question
KenH - engine room insulation question [message #165423] Thu, 05 April 2012 07:28 Go to next message
midlf is currently offline  midlf   United States
Messages: 2212
Registered: July 2007
Location: SE Wisc. (Palmyra)
Karma: 1
Senior Member
Since this subject came up under another thread I'll start a fresh one here where others may also benefit. I looked through your photo albums and could only find hints of the insulation installation in your "engine out the bottom" album.

If you need a pause in your Cad500 odyssey could you take some photos of your engine compartment insulation and post them. Also, if you had it to do again what would you do differently, other than the previously discussed edge tape issue. (I.E. don't use tape to seal the edges, use metal such as flashing angles.)


Steve Southworth
1974 Glacier TZE064V100150 (for workin on)
1975 Transmode TZE365V100394 (parts & spares)
Palmyra WI
Re: [GMCnet] KenH - engine room insulation question [message #165512 is a reply to message #165423] Thu, 05 April 2012 22:15 Go to previous messageGo to next message
Ken Henderson is currently offline  Ken Henderson   United States
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
Senior Member
Steve,

Since Bdub & I seem to be hopelessly intertwined on the photo site, I've
got to figure out how to show temporary stuff some other way. This is an
attempt to use Picassa:

https://plus.google.com/photos/104751412492885367164/albums/5728119548654669489
or
http://goo.gl/wNEl1

Ken H.


On Thu, Apr 5, 2012 at 8:28 AM, Steve Southworth wrote:

>
>
> Since this subject came up under another thread I'll start a fresh one
> here where others may also benefit. I looked through your photo albums and
> could only find hints of the insulation installation in your "engine out
> the bottom" album.
>
> If you need a pause in your Cad500 odyssey could you take some photos of
> your engine compartment insulation and post them. Also, if you had it to
> do again what would you do differently, other than the previously discussed
> edge tape issue. (I.E. don't use tape to seal the edges, use metal such as
> flashing angles.)
> --
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
Re: [GMCnet] KenH - engine room insulation question [message #165540 is a reply to message #165512] Fri, 06 April 2012 08:44 Go to previous messageGo to next message
midlf is currently offline  midlf   United States
Messages: 2212
Registered: July 2007
Location: SE Wisc. (Palmyra)
Karma: 1
Senior Member
Ken Henderson wrote on Thu, 05 April 2012 22:15

Steve,

Since Bdub & I seem to be hopelessly intertwined on the photo site, I've
got to figure out how to show temporary stuff some other way. This is an
attempt to use Picassa:

https://plus.google.com/photos/104751412492885367164/albums/5728119548654669489
or
http://goo.gl/wNEl1

Ken H.





Yeah - I noticed the Bdub thing. It was a bit confusing.

Google, after they forced me to sign up, still gives me a 404 error on your posted URLs. (Some days I am tempted to just chuck all the computers in the trash and go Luddite.)




Steve Southworth
1974 Glacier TZE064V100150 (for workin on)
1975 Transmode TZE365V100394 (parts & spares)
Palmyra WI
Re: [GMCnet] KenH - engine room insulation question [message #165555 is a reply to message #165540] Fri, 06 April 2012 11:32 Go to previous messageGo to next message
Ken Henderson is currently offline  Ken Henderson   United States
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
Senior Member
You mean you can't get to either the original or tiny URL below? Do you
want me to send you the photos direct?

Ken H.

On Fri, Apr 6, 2012 at 9:44 AM, Steve Southworth wrote:

>
>
> Ken Henderson wrote on Thu, 05 April 2012 22:15
> > Steve,
> >
> > Since Bdub & I seem to be hopelessly intertwined on the photo site, I've
> > got to figure out how to show temporary stuff some other way. This is an
> > attempt to use Picassa:
> >
> >
> https://plus.google.com/photos/104751412492885367164/albums/5728119548654669489
> > or
> > http://goo.gl/wNEl1
> >
> > Ken H.
>
>
> Yeah - I noticed the Bdub thing. It was a bit confusing.
>
> Google, after they forced me to sign up, still gives me a 404 error on
> your posted URLs. (Some days I am tempted to just chuck all the computers
> in the trash and go Luddite.)
>
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
Re: [GMCnet] KenH - engine room insulation question [message #165556 is a reply to message #165555] Fri, 06 April 2012 12:04 Go to previous messageGo to next message
jayrabe is currently offline  jayrabe   United States
Messages: 509
Registered: June 2009
Location: Portland, OR
Karma: 0
Senior Member

I can't get to either of them either.
"You do not have access to this page." is the error message.

Jay Rabe
76 PB
Portland, OR

> From: hend4800@bellsouth.net
> Date: Fri, 6 Apr 2012 12:32:35 -0400
> To: gmclist@temp.gmcnet.org
> Subject: Re: [GMCnet] KenH - engine room insulation question
>
> You mean you can't get to either the original or tiny URL below? Do you
> want me to send you the photos direct?
>
> Ken H.
>
> On Fri, Apr 6, 2012 at 9:44 AM, Steve Southworth wrote:
>
> >
> >
> > Ken Henderson wrote on Thu, 05 April 2012 22:15
> > > Steve,
> > >
> > > Since Bdub & I seem to be hopelessly intertwined on the photo site, I've
> > > got to figure out how to show temporary stuff some other way. This is an
> > > attempt to use Picassa:
> > >
> > >
> > https://plus.google.com/photos/104751412492885367164/albums/5728119548654669489
> > > or
> > > http://goo.gl/wNEl1
> > >
> > > Ken H.
> >
> >
> > Yeah - I noticed the Bdub thing. It was a bit confusing.
> >
> > Google, after they forced me to sign up, still gives me a 404 error on
> > your posted URLs. (Some days I am tempted to just chuck all the computers
> > in the trash and go Luddite.)
> >
> >
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] KenH - engine room insulation question [message #165557 is a reply to message #165555] Fri, 06 April 2012 12:05 Go to previous messageGo to next message
k2gkk is currently offline  k2gkk   United States
Messages: 4452
Registered: November 2009
Karma: -8
Senior Member

You have to sign in and disclose your identity
to open those, Ken.

It's my OPINION that Google may be the biggest
threat to our personal security!

~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
~~ ~ D C "Mac" Macdonald ~ ~~
~~ k2gkk @ hotmail dot com ~~
~ ~ Amateur Radio - K2GKK ~ ~
~ ~ USAF and FAA, Retired ~ ~
~ ~ ~ Oklahoma City, OK ~ ~ ~
~~ ~ ~ "The Money Pit" ~ ~ ~~
~ ~ ~ ex-Palm Beach, 76 ~ ~ ~
~ www.gmcmhphotos.com/okclb ~
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
_______________
*[ ]....[][ ][]\
*--OO---[]---O-*





> From: hend4800@bellsouth.net
> Date: Fri, 6 Apr 2012 12:32:35 -0400
> To: gmclist@temp.gmcnet.org
> Subject: Re: [GMCnet] KenH - engine room insulation question
>
> You mean you can't get to either the original or tiny URL below? Do you
> want me to send you the photos direct?
>
> Ken H.
>
> On Fri, Apr 6, 2012 at 9:44 AM, Steve Southworth wrote:
>
> >
> >
> > Ken Henderson wrote on Thu, 05 April 2012 22:15
> > > Steve,
> > >
> > > Since Bdub & I seem to be hopelessly intertwined on the photo site, I've
> > > got to figure out how to show temporary stuff some other way. This is an
> > > attempt to use Picassa:
> > >
> > >
> > https://plus.google.com/photos/104751412492885367164/albums/5728119548654669489
> > > or
> > > http://goo.gl/wNEl1
> > >
> > > Ken H.
> >
> >
> > Yeah - I noticed the Bdub thing. It was a bit confusing.
> >
> > Google, after they forced me to sign up, still gives me a 404 error on
> > your posted URLs. (Some days I am tempted to just chuck all the computers
> > in the trash and go Luddite.)

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] KenH - engine room insulation question [message #165558 is a reply to message #165555] Fri, 06 April 2012 12:08 Go to previous messageGo to next message
Mr ERFisher is currently offline  Mr ERFisher   United States
Messages: 7117
Registered: August 2005
Karma: 2
Senior Member
both do not work

says we do not have permission

gene



On Fri, Apr 6, 2012 at 9:32 AM, Ken Henderson <hend4800@bellsouth.net>wrote:

> You mean you can't get to either the original or tiny URL below? Do you
> want me to send you the photos direct?
>
> Ken H.
>
> On Fri, Apr 6, 2012 at 9:44 AM, Steve Southworth wrote:
>
> >
> >
> > Ken Henderson wrote on Thu, 05 April 2012 22:15
> > > Steve,
> > >
> > > Since Bdub & I seem to be hopelessly intertwined on the photo site,
> I've
> > > got to figure out how to show temporary stuff some other way. This is
> an
> > > attempt to use Picassa:
> > >
> > >
> >
> https://plus.google.com/photos/104751412492885367164/albums/5728119548654669489
> > > or
> > > http://goo.gl/wNEl1
> > >
> > > Ken H.
> >
> >
> > Yeah - I noticed the Bdub thing. It was a bit confusing.
> >
> > Google, after they forced me to sign up, still gives me a 404 error on
> > your posted URLs. (Some days I am tempted to just chuck all the
> computers
> > in the trash and go Luddite.)
> >
> >
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>



--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] KenH - engine room insulation question [message #165567 is a reply to message #165555] Fri, 06 April 2012 13:43 Go to previous messageGo to next message
midlf is currently offline  midlf   United States
Messages: 2212
Registered: July 2007
Location: SE Wisc. (Palmyra)
Karma: 1
Senior Member
Ken Henderson wrote on Fri, 06 April 2012 11:32

You mean you can't get to either the original or tiny URL below? Do you
want me to send you the photos direct?

Ken H.




Nope still can't get in and I signed up w/ the new evil empire to get in. The message I got was "403. That’s an error.
We're sorry, but you do not have access to this page. That’s all we know."

One possibility is that the URL listed is one for you after you signed in. If you send me the pics I can post them as my albums still work for me.

the email is midlf and the ISP is centurytel.net




Steve Southworth
1974 Glacier TZE064V100150 (for workin on)
1975 Transmode TZE365V100394 (parts & spares)
Palmyra WI
Re: [GMCnet] KenH - engine room insulation question [message #165580 is a reply to message #165567] Fri, 06 April 2012 18:37 Go to previous messageGo to next message
Ken Henderson is currently offline  Ken Henderson   United States
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
Senior Member
Sorry, Y'All. I'm sure there's a way to make them public, but I don't yet
know how. And right now I'm alone, without WiFi access on my own computer,
at my daughter's home in Atlanta.

I'll do something, right or wrong, when they bring me the security code for
their network.

Ken H.

On Fri, Apr 6, 2012 at 2:43 PM, Steve Southworth wrote:

>
>
> Nope still can't get in and I signed up w/ the new evil empire to get in.
> The message I got was "403. That&#8217;s an error.
> We're sorry, but you do not have access to this page. That&#8217;s all we
> know."
>
> One possibility is that the URL listed is one for you after you signed in.
> If you send me the pics I can post them as my albums still work for me.
>
> the email is midlf and the ISP is centurytel.net
>
>
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
Re: [GMCnet] KenH - engine room insulation question [message #165742 is a reply to message #165557] Sun, 08 April 2012 11:29 Go to previous message
C Boyd is currently offline  C Boyd   United States
Messages: 2629
Registered: April 2006
Karma: 18
Senior Member
[quote title=k2gkk wrote on Fri, 06 April 2012 13:05]
You have to sign in and disclose your identity
to open those, Ken.

It's my OPINION that Google may be the biggest
threat to our personal security!

~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
~~ ~ D C "Mac" Macdonald ~ ~~
~~ k2gkk @ hotmail dot com ~~
~ ~ Amateur Radio - K2GKK ~ ~
~ ~ USAF and FAA, Retired ~ ~
~ ~ ~ Oklahoma City, OK ~ ~ ~
~~ ~ ~ "The Money Pit" ~ ~ ~~
~ ~ ~ ex-Palm Beach, 76 ~ ~ ~
~ www.gmcmhphotos.com/okclb ~
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
_______________
*[ ]....[][ ][]\
*--OO---[]---O-*






Sir: the other day I had the puter on with no programs open, just sitting here turned on. All of a sudden Norton pops up a security warning saying my 500 gig hard drive was experiencing extremely high cpu usage by Google Chrome. It is not my defalt brouser and I only use it ocasionally so I un-installed it.


C. Boyd
76 Crestmont
East Tennessee
Previous Topic: Re: [GMCnet] Dual Carb Intake
Next Topic: what to do with that old MagicJack
Goto Forum:
  


Current Time: Mon Nov 18 14:24:39 CST 2024

Total time taken to generate the page: 0.02768 seconds