GMCforum: GMCnet » Isle width

Home » Public Forums » GMCnet » Isle width (need some one the measure)

Show: Today's Messages :: Polls :: Message Navigator

Isle width [message #164822]

Sat, 31 March 2012 19:32

1275gtsport

Messages: 272
Registered: September 2009
Location: Rothesay NB

Karma:

Senior Member

OK doing some rebuilding. have the material for the flooring and looking at only doing this once.

the wardrobe is not in straight. I know this Because the bathroom door won't open all the way and when I place a level on the shower module it shows as plumb the wardrobe is not. The closet door will open all the way.

I need to know if the "kickplate" is the right distance apart and the cabinet part of the wardrobe is not on it right. this assumes that it is in 2 pieces in the first place.

The Wardrobe needs to be replaced and I am planning on doing it, next year. but I don't want to end up with a gap between my floor and the kick plate.

Thanks.

Adam Raeburn
Rothesay, NB
1976 Austin Mini
1977 GMC Palm Beach
---------------------------------------------------
Once you replace everything that is attached to something else. It will all be fixed.

Report message to a moderator

[Message index]

		Isle width By: 1275gtsport on Sat, 31 March 2012 19:32
		Re: Isle width By: Harry on Sat, 31 March 2012 23:39
		Re: Isle width By: Chr$ on Sun, 01 April 2012 18:45
		Re: Isle width By: Adrien G. on Sun, 01 April 2012 01:46
		Re: Isle width By: glacierfl on Sun, 01 April 2012 12:10
		Re: Isle width By: 1275gtsport on Sun, 01 April 2012 18:04

Previous Topic:	Who's #1 in the #2 business?
Next Topic:	Dinette table dimensions?

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Nov 18 18:23:14 CST 2024

Total time taken to generate the page: 0.01236 seconds